User's Manual Part 2

Settings 73
Tap-and-hold on the time in the notification area to switch between Analog and Digital.
Memory
MemoryMemory
Memory
You can use the slider bar to assign how much memory to be dedicated to storage or pro-
grams. In addition, this screen displays total storage and program memory, along with the
amount of allocated memory, in use memory, and free memory for both memory types.
Selecting the ‘Storage Card’ tab shows you free memory for any storage cards you've
installed in your PDA phone.
Selecting the ‘Running Programs’ shows you the currently running applications. By tap-
ping ‘Activate’, you will bring the highlighted program to the foreground so you can
begin work on it immediately. If you tap ‘Stop’, the highlighted program will be termi-
nated. Finally, tapping ‘Stop All’ will try to terminate all running programs, though not all
will necessarily respond to being closed in this manner.
Power
PowerPower
Power
Here you can see the current state of the battery and how much power it has left.
CPU Performance
CPU PerformanceCPU Performance
CPU Performance
This function allows you to adjust the CPU
performance of your PDA phone.
Automatic mode
Automatic modeAutomatic mode
Automatic mode: The mode adjusts the system
performance automatically.
Normal mode
Normal modeNormal mode
Normal mode: This mode maintains the efficiency and
power consumption for the normal
system performance.
Power saving mode
Power saving modePower saving mode
Power saving mode: This mode extends the standby
time of your PDA phone, but less
system efficiency.
Optimization mode
Optimization modeOptimization mode
Optimization mode: This mode maintains the best
system performance, but higher
power consumption.