User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your monitor
- How to adjust your monitor
- The control panel
- The S Switch
- 5-way controller and basic menu operations
- Working with the Rotation Keys
- Working with the Quick Menu
- Adjusting display mode
- Choosing an appropriate picture mode
- Setting up your own game mode
- Working with game mode to go by S Switch
- Enabling color vision accessibility (Color Weakness)
- Adjusting Dynamic Accuracy (selected models only)
- Activating VESA standard DisplayPort Adaptive-Sync (XL2546K)
- Using Scaling
- Initial setup for playing games at 144 Hz
- Navigating the main menu
- Troubleshooting
56
Power LED indicator
OSD controls
OSD messages
Audio
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or visit the
local website from www.BenQ.com or zowie.benq.com for more support and local customer service.
Faint shadow from the static image displayed is visible on the screen.
• Activate the power management function to let your computer and monitor go into a low power
"sleep" mode when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
The LED indicator is white or orange.
• If the LED lights up in solid white, the monitor is powered on.
• If the LED is illuminated in white and there is a message Out of Range on the screen, this means
you are using a display mode that this monitor does not support, please change the setting to one
of the supported mode. Download Resolution file from the website (see Product support on
page 3). Refer to "Adjusting the Screen Resolution". And then select the correct resolution,
refresh rate and make adjustments based on these instructions.
• If the LED is illuminated in orange, the power management mode is active. Press any button on
the computer keyboard or move the mouse. If that does not help, check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
• If the LED is off, check the power supply mains socket, the external power supply and the mains
switch.
The OSD controls are inaccessible.
To unlock the OSD controls when it is preset to be locked, press and hold any key for 10 seconds.
A message Out of Range on the screen during computer boot up process.
If there is a message Out of Range on the screen during computer boot up process, this means
computer compatibility caused by operating system or graphic card. The system will adjust the
refresh rate automatically. Just wait until the operating system is launched.
No sound can be heard from the connected external speakers.
• Remove your headphone (if the headphone is connected to the monitor).
• Check whether the headphone jack is properly connected.
• If the external speakers are USB-powered, check whether the USB connection is OK.
• Increase the volume (volume may be muted or too low) on the external speakers.