User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your monitor
- How to adjust your monitor
- The control panel
- The S Switch
- 5-way controller and basic menu operations
- Working with the Rotation Keys
- Working with the Quick Menu
- Adjusting display mode
- Choosing an appropriate picture mode
- Setting up your own game mode
- Working with game mode to go by S Switch
- Enabling color vision accessibility (Color Weakness)
- Adjusting Dynamic Accuracy (selected models only)
- Activating VESA standard DisplayPort Adaptive-Sync (XL2546K)
- Using Scaling
- Initial setup for playing games at 144 Hz
- Navigating the main menu
- Troubleshooting
40
2. Go to the setup menu in your game, and change the frame rate or screen refresh rate to 144 Hz.
Refer to the Help document that came with your game for details.
3. To check if the screen refresh rate has been changed, go to the Quick Menu on your monitor and
check the system information.
4. Select an appropriate picture mode for your game. See Mode menu on page 42.
5. On the selected mode, adjust the brightness of your display. See Brightness on page 46.
6. Adjust the brightness and contrast of the black shades by Black eQualizer. See Black eQualizer on
page 44.
If 144 Hz is not available on your menus, check the following:
• make sure the DisplayPort cable is properly connected to your computer and the monitor
• make sure your GPU supports 144 Hz
• make sure your game supports 144 Hz.