User Manual

22
Installing the Shield (shading hood, optional)
To help focusing in games, the Shield (shading hood) avoids the unwanted disturbance interfered with the
peripheral vision while playing.
For models that came with shading hoods, two shading hoods are inside the accessory box. Please be
careful to prevent damage to the Shield and the monitor. The shading hoods are well-designed and can fit
into your monitor properly. Do not use excessive force when installing Shield to avoid possible damage.
For models that did not come with shading hoods, you can purchase them separately. Visit BenQ website
for the availability of XH250.
1. Prepare for the shield installation.
Place the monitor upright on its stand on a flat even
surface. Make sure the monitor is rotated to the
landscape mode.
2. Attach the Shield to the monitor.
Two shading hoods are not identical. The logo should
be facing outward on the upper section.
Attaching the hoods by aligning the hooks to the holes
on both sides of the monitor. Once the hooks are
aligned properly, slide down the hood and the hooks
will be locked into place.
3. Adjust the hoods to the desired angle.
1
2
1
2