User's Manual

©
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\04FL00594 R66_USA_Ersterstellg\Work\S66_Cingular_us\S66_Cingular_FCC\S66_Startup.fm
15Getting started
VAR Language: am; VAR issue date: 040825
left page (15) of S66 Cingular am, A31008-H7410-A40-1-4A19 (26.08.2004, 16:31)
Getting started
The phone is packaged in dismantled
form and must be re-assembled prior
to using for the first time.
Your phone's
display is sup-
plied with a
protective film.
Remove this film
slowly before as-
sembling the
phone.
In rare cases,
static discharge
may cause disco-
louration at the edges of the display.
However, this will disappear within
approx. 10 minutes.
Insert SIM card/battery
The service provider supplies you with
a SIM card on which all the important
data for your line is stored. If the SIM
card has been delivered in credit-card
size, snap the smaller segment out
and remove any rough edges.
• Press the grooved area
1, then
push the battery cover towards
the front in the direction indicated
by the arrow
2.
• Place the SIM card flat in front of
the slot with the contact surface
facing downwards. Then push
the SIM card in using gentle pres-
sure
3 (ensure that the cham-
fered corner is in the correct
position).
• Insert the battery sideways into
the phone
4, then press it down-
wards
5 until it clicks into
position.
1
2
3