User's Manual

Calling
18
S56 am, A31008-H5700-A40-1-7619 (6. December 2002, 13:47)
© Siemens AG 2002, D:\Pool\L55\S55\am\Kurzanleitung\S56K_Phone.fm
Calling
Dialing with number keys
The phone must be switched on
(standby mode).
J
Dial number (always with
prefix, if necessary with
international dialing
code).
§Clear§ A short press clears
the last digit, a long press
clears the entire number.
A
Press the Call key to dial
the number.
End call
B
Press End key briefly.
The call is ended. Press this key even
if the person on the other end of the
line has hung up first.
Set volume
Ò Ó
Use the left side key to
change volume (only
possible during a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial previous numbers
To redial numbers that were dialed
previously:
A
Press the Call key once.
G
Pick out the required
phone number from the
list, then press ...
A ... to dial.
When the connection is
busy
Automatic redial of last number
§Auto dial§ The number is auto-
matically dialed for
up to 15 minutes at
increasing intervals.
Or
Call back
§Call back§ your phone rings
when the busy number
is free.
Reminder
§Prompt§ A beep reminds you to re-
dial the displayed phone
number after 15 minutes.
International dialing code
In standby mode, to insert international di-
aling codes from the list:
0
Hold down until a "+" is dis-
played. This replaces the first
two digits of the international
dialing code.
§+List§ Press, select country.
L