User's Manual

ManualsBrandsBenQ Mobile ManualsCell PhonesTri-Band GSM Mobile Phone with BT

Table Of Contents

Table of Contents 1

See also Index at the end of this User Guide

right page (1) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:26)

Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060222

Legal notices .............................. 3

Safety precautions ..................... 6

Antenna care ........................... 8

Phone operation ...................... 8

Electronic devices ........................9

Phone overview ....................... 12

Display symbols ....................... 14

Getting started ......................... 16

Inserting battery/

SIM card/MicroSD card ........... 16

Charging the battery ..................17

User guide ............................. 19

Slider .........................................20

Standby mode ...........................20

Tabs ...................................... 20

Digital Rights Mgmt. (DRM) .......21

Menu controls ........................ 21

Centre key .................................22

Standard functions ................. 22

Security .................................... 23

PIN, PUK, Phone code ............. 23

Text input ................................. 26

Calling ...................................... 29

Ending a call ..............................29

Setting the volume ................ 29

Accepting a call ..........................31

Rejecting a call ...........................31

Handsfree .............................. 31

Swapping between 2 calls ...... 32

Call options ................................34

Direct call ...................................34

Tone sequences (DTMF) ............35

Contacts .................................... 36

All contacts ................................36

Groups ................................... 38

Online status ..........................38

SIM ........................................38

Filter ......................................39

General options .........................39

Call records ............................... 41

Dur./charges ............................. 42

Camera ..................................... 43

SMS/MMS .................................. 46

Writing an SMS ....................... 46

Writing an MMS .........................47

Receiving ...................................49

Reading .....................................49

Draft ......................................50

Outbox ...................................50

Sent ...........................................50

Archive ...................................50

Templates .............................. 50

SMS settings ..............................51

MMS settings .............................51

Zoom in .................................52

Emoticons ..............................52

Save aft. send ......................... 52

Auto-delete ...............................52

E-mail ........................................ 53

Writing/sending ......................53

Receiving/reading ......................54

Draft ..........................................55

Table of

Contents

Summary of content (151 pages)

PAGE 1
right page (1) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:26) Legal notices .............................. 3 Safety precautions ..................... 6 Antenna care ........................... 8 Phone operation ...................... 8 Electronic devices ........................9 Phone overview ....................... 12 Display symbols ....................... 14 Getting started ......................... 16 Inserting battery/ SIM card/MicroSD card ........... 16 See also InCharging the battery .............
PAGE 2
left page (2) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:26) Table of Contents Outbox .................................. 55 Msg. archive .......................... 55 Settings .....................................55 WAP push ................................. 57 Chat room ................................ 58 Voice mailbox/Mailbox ............ 63 CB services ............................... 64 Internet .................................... 65 Settings .................................... 68 Profiles ...........
PAGE 3
right page (3) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) 3 © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_LegalNotices.fm Legal notices The mobile phone described in this guide is approved for use on the GSM and GPRS networks operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS) bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries. © 2006 Siemens Communications Inc. All rights reserved.
PAGE 4
left page (4) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) Legal notices Export Information The mobile phone may be subject to export regulation of the United States and other countries. Diversion contrary to law is prohibited.
PAGE 5
right page (5) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_LegalNotices.fm Memory The mobile phone contains an internal memory device that stores the software required to operate the mobile phone, communicate with the GSM/GPRS network and provide the user interface. Some features in the internal memory run additional devices and some additional games and utilities.
PAGE 6
left page (6) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:17) Safety precautions Safety precautions Information for parents Please read the operating instructions and safety precautions carefully before use. Explain the content and the hazards associated with using the phone to your children. Remember to comply with legal requirements and local restrictions when using the phone. For example in aeroplanes, petrol stations, hospitals or whilst driving.
PAGE 7
right page (7) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:17) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_SecurityInfo.fm Do not place the phone near to electromagnetic data carriers such as credit cards and floppy disks. Information stored on them could be lost. You may only open the phone to replace the battery (100 % mercury-free), SIM and Micro SD Card. You must not open the battery under any circumstances.
PAGE 8
left page (8) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:17) Safety precautions • An automatic connection acceptance ("connection without confirmation") should only be used in exceptional cases. • In general, only trustworthy devices should be linked in order to minimize security risks. • You should restrict the "visibility" of your phone if possible. This will make it much more difficult for unknown devices to establish a connection with your phone. To do this, in the Bluetooth menu, set the option Visib.
PAGE 9
right page (9) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:17) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_SecurityInfo.fm 9 Driving Electronic devices Laws pertaining to the use of mobile phones while driving vary significantly from state to state and sometimes even from locality to locality within states.
PAGE 10
left page (10) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:17) Safety precautions Other medical devices Blasting areas If you use any other personal medical devices, consult the manufacturers of your devices to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so.
PAGE 11
right page (11) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:17) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_SecurityInfo.fm This phone, like any wireless phone, operates using radio signals, wireless and landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential communications (for example, medical emergencies).
PAGE 12
left page (12) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:18) Phone overview Phone overview 1 Softkeys 2 3 4 The current functions of these keys are shown as §text§/symbols (e.g. p). A Call key Dial displayed/highlighted phone numbers/names, accept calls. In standby mode, show last phone numbers dialled. B On/Off/End key • Press and hold to switch on or off. • During a conversation or in an application: press briefly to end and return to standby mode. • In menus: return to standby mode.
PAGE 13
right page (13) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:18) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Overview.fm 1 Loudspeaker 2 Standby indicator LED The LED indicates the occurrence of several states or events on the phone (page 20). Status indicator line 3 4 x Fast dialing key Key for directly calling one number (see page 78). X Camera key 5 6 [ / \ Volume control 7 Plug socket 8 * Ringtone 9 • Press and hold in standby mode: switch all acoustic signals on/off (e
PAGE 14
left page (14) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Display symbols Display symbols Display symbols (selection) á à Þ L P O W Q M R S V N U T Ç ½ ¹ Ä T9Abc £ ¢ ¤ Signal strength Charging Battery charge level, e.g. 50 % Contacts Call records Internet/Service provider portal Games Organizer Messages Camera Extras Media player My stuff Alarm clock Settings All calls are diverted Ringer (beep) off Alarm set Keypad locked Text input with T9.
PAGE 15
right page (15) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Displaysymbols.fm Message symbols (selection) m n o p q r Unread Read Draft Sent MMS not sent MMS notification received t MMS with DRM contents (page 21) v l E-mail with attachment Voice mail received Camera symbols Ú Û Ø Zoom factor White balance Flash activated 15 Template: X75, 143x105 mm, Version 2.
PAGE 16
left page (16) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Getting started Getting started Your phone's display is covered with a protective film. Remove this before using the phone. In rare cases static discharge can cause temporary discolouration in the display. However, this will disappear within approx. 10 minutes. Insert SIM card Ensure that the cut-off corner is in the correct position.
PAGE 17
right page (17) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Charging the battery Close battery cover © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Startup.fm 6 17 5 7 • To remove the battery cover, press the release button 7, then lift the battery cover. Additional information Please switch off your phone before removing the battery! 1.8 and 3 volt SIM cards are supported. Please contact your service provider if you have a different card.
PAGE 18
left page (18) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Switching on/off, PIN entry Operating time The operating time depends upon the respective conditions of use. Extreme temperatures considerably reduce the phone’s standby time. You should therefore avoid leaving the phone in the sun or on a radiator.
PAGE 19
right page (19) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Startup.fm Additional information Changing the PIN.........................page 24 Clearing SIM card barring ............page 24 Slider open: A short press B opens a menu with Ringtones OFF and Ph. + Alarms off.
PAGE 20
left page (20) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) General instructions Slider Standby mode Open slider completely The phone is in standby mode and is ready for use when the name of the service provider appears on the display. • Light on. • Keypad unlocked. • Opening melody on (if set). • The call is accepted. • Alarm sound off (appointment, alarm). Close slider completely • Prompt to decide whether application should be continued or returned to standby status.
PAGE 21
right page (21) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Startup.fm Digital Rights Mgmt. (DRM) Remember that your phone has Digital Rights Management. The use of downloaded pictures, sounds or applications can be restricted by the suppliers, e.g. copy protection, use for a limited period of time only, number of times it can be used etc.
PAGE 22
left page (22) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) General instructions Centre key Printö Printout on a suitable terminal via Bluetooth or USB (first select function Via USB then connect the printer cable). Reply/ Reply to all Save The sender becomes the recipient, "Re:" is placed before the subject, and the received text is transferred into the new message. Save Store entry. Play Save to ª Save marked address information in Contacts.
PAGE 23
right page (23) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Startup.fm Printing via USB This Mobile Printing Ready product is designed to provide easy printing from mobile phones by connecting the mobile phone to the printer with a USB data cable (first select Printö, then Via USB and then connect the USB cable). This product follows the Guidelines Version 1.0 for PictBridge from Mobile Imaging and Printing Consortium (MIPC).
PAGE 24
left page (24) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Security í ¢T¢Security ¢PIN code ¢Select function. PIN code The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not permit deactivating the control. ñ J ì Edit. Enter PIN. Confirm entry. Change PIN You can change the PIN to any 4 to 8-digit number you find easier to remember. ñ J ì J ,ì J ,ì Edit. Enter current PIN.
PAGE 25
right page (25) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Preventing accidental activation © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Startup.fm Even if PIN use is deactivated (page 18) confirmation is required to switch on the phone. This prevents the phone from being switched on accidentally, e.g. when carried in a pocket or whilst you are on an aircraft. B Press and hold. §OK§ Press. The phone switches on.
PAGE 26
left page (26) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Text input Text input Text input without T9 Special characters Press the number key repeatedly until the required character appears. After a brief interval the cursor will advance. Example: * 2 1) Press briefly. The symbols chart is displayed: ¿ ¡ Press once briefly to write the letter a, twice to write b, etc. + - Press and hold to write the number.
PAGE 27
right page (27) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Text.fm 27 For "hotel", for example: T9 word suggestions # If several options are found in the dictionary for a key sequence (a word), the most probable is displayed first. If the word you want has not been recognised, the next suggestion from T9 may be correct. Press briefly for T9Abc, then 46835 1 A blank ends a word. Do not use special characters such as Ä.
PAGE 28
left page (28) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Text input Additional information Within a "T9 word", individual letters may not be edited without first removing the T9 status. In most cases it is better to rewrite the complete word. 0 Set a full stop. The word is concluded if it is followed by a space. Within a word, a full stop represents an apostrophe or hyphen: e.g. §provider.s§ = provider’s. Moving the cursor to the right ends the word.
PAGE 29
right page (29) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) 29 Calling © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Phone.fm Dialling with number keys The phone must be switched on (standby mode) and the slider must be open. J Enter number (always with area/international dialling code). ]A short press clears the last digit, press and hold clears the entire number. A Press the Call key. The displayed phone number is dialled.
PAGE 30
left page (30) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Calling Redialling To redial the phone number last called: A b A §Options§ Open call menu. Auto dial The phone number is automatically dialled ten times at increasing time intervals. Press Call key the twice. To redial other phone numbers that were dialled previously: A I Auto last number redial Press the Call key once. Pick out the phone number from the list, then press … … to dial. ì Or B End key.
PAGE 31
right page (31) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Phone.fm Accepting a call Rejecting a call The phone must be switched on. An incoming call will interrupt any other use of the phone. §Reject§ A Press the Call key. Or ð Press the centre key. Or Open slider. A phone number transmitted by the network plus the corresponding name are displayed if they are stored in Contacts (page 38).
PAGE 32
left page (32) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Calling Swapping between 2 calls Incoming calls during a call §Options§ Open call menu. You may need to register for this service with your service provider and set your phone accordingly. During a call, you may be advised that there is another call waiting. You will hear a special tone during the call (page 80). You have the following options: Hold The current call is put on hold.
PAGE 33
right page (33) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Phone.fm Ending calls B Press briefly. Or Close slider. H /J §Yes§ You accept the call on hold. §No§ You end the second call too. b You can call up to 5 conference participants one after the other and then link them together in a conference call. Some of the functions described may not be supported by your service provider or may have to be enabled specially.
PAGE 34
left page (34) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Calling Call options Direct call The following functions are only available during a call: If this is active, only one number can be dialled. §Options§ Open menu. Hold Hold current call. Microphone on If switched off, the person on the other end of the line cannot hear you (muting). Also: press * and hold. Switching on C ¢T¢Security ì ¢Direct call J Confirm selection. Enter phone code.
PAGE 35
right page (35) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Phone.fm 35 Tone sequences (DTMF) Using Contacts You can, for example, enter tone sequences (digits) for remote access to an answering machine during an existing connection. These entries are transmitted directly as DTMF codes (tone sequences). Store phone numbers and tone sequences (DTMF tones) in Contacts in the same way as a normal entry.
PAGE 36
left page (36) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Contacts Contacts C¢ L You can store up to 5000 entries in this phone directory, with several phone and fax numbers plus additional address details. For fast access, the contacts and functions are sorted and offered on five tabs: All contacts, Groups, Online status, SIM, Filter H F Open Contacts (fast access in standby mode). Switch between the individual tabs.
PAGE 37
right page (37) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Contacts.fm In the respective tabs: I Select required input fields. J Fill in input fields. The maximum number of characters available is shown at the top of the display. At least one name or one company must be entered. Always enter phone number with dialling code. ú Open options menu and select Save. Viewing/editing entries I F ü ú Select required entry.
PAGE 38
left page (38) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Contacts Communication I I Start a conference call. A or A Communication Select distribution list, open §§Options§ and select Create message. Select group, open §§Options§ and select Create message. or Start a conference call. Groups Online status You are offered 10 different groups to enable you to arrange your contacts clearly. You can edit the names of groups as you wish.
PAGE 39
right page (39) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) General options Editing menu © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Contacts.fm §Options§ Add more fields Open menu. Move SIM card entry to the phone memory. Now all tabs are offered for further entries. from contacts Copy entry/entries from the phone memory to the SIM card (reduced information). Change Location: SIM/ Protected SIM.
PAGE 40
left page (40) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Contacts More As business c. Location Switch the storage location of entries between the phone memory and the SIM card. Define a selected contact as a business card. Synchronizatn. You can synchronise your mobile with an organiser stored on the Internet (Remote sync., page 98). Capacity Display memory capacity. Settings Default sort order: First name or surname. Spec. numbers Display special phone numbers, yes/no.
PAGE 41
right page (41) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) 41 Call records © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Records.fm A caller's phone number is displayed if • the caller has switched off the Hide ID function and • the network supports the "Caller Identity" function. Missed calls The phone numbers of calls made to your phone but not answered are stored for call back purposes. ¿ Press the softkey beneath the symbol to bring up the inbox.
PAGE 42
left page (42) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) Dur./charges Dur./charges You can display the charges and duration during a call. You can set a unit limit for outgoing calls. C ¢P¢Dur./charges Last call All outg. calls All incom. calls Remain. units (Only shown if supported by your service provider) I C Select display. Open area. Dur./charges options ú Open menu. Charge/Unit (PIN2 prompt) Enter the currency used as well as the charge per unit or time.
PAGE 43
right page (43) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) 43 Camera © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Camera.fm A camera with flash is integrated in the phone. Take photos/record videos and • use photos as wallpaper, a logo, screensaver or startup and shutdown animation • assign a photo/video to a contact • send photos/videos via MMS or e-mail • save photos in My stuff (page 111). Switching on C¢ R Or X Press camera key in standby mode.
PAGE 44
left page (44) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Camera Image resolution Video resolution It is possible to set the quality of the image regardless of the preview image resolution. It is possible to set the quality of the image for a video regardless of the preview image resolution. The best possible resolution is 176 x 144 pixels. To take individual wallpaper images you need to set Background as the image resolution in the options.
PAGE 45
right page (45) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Camera options Settings The following functions are available, depending on the current situation. © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Camera.fm §Options§ Open menu. Memory assis. If there is insufficient memory available the memory assistant is started. Pictures Display list of photos. • • • • Other videos Display list of videos. Microphone Switch microphone on or on off.
PAGE 46
left page (46) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) SMS/MMS SMS/MMS You can use your phone to send and receive text messages and MMS (Multimedia Messaging Service) messages. Information about SMS You can use your phone to transmit and receive very long messages (up to 760 characters). They are automatically composed of several "normal" SMS messages (note higher charges). Using special letters in some languages reduces the maximum possible length of an SMS.
PAGE 47
right page (47) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_SMS-MMS.fm 47 Writing an MMS Add addressee Add recipient. Add from † Add a recipient from Contacts. Add itemö When melodies, pictures, videos or animations are added the SMS is converted into an MMS (page 47). Remember that these may be protected (DRM, page 21). An MMS may comprise a series of pages. Each page may contain a text, a picture/video and a sound.
PAGE 48
left page (48) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) SMS/MMS Sending A Enter phone number or ú open menu, then select Add from †, select recipient from Contacts. You can add more than one. If you want to insert a subject: A Open menu, then select Add Subject: and enter a brief description of the MMS. Start sending process. View pictures/ Play back selected Play sound videos or melodies. Open attach. Show selected attached files. Remove recip. Remove recipient.
PAGE 49
right page (49) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Receiving © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_SMS-MMS.fm A new incoming message is shown in the display. ì m Display the message. Use the softkey underneath to open the Inbox. Reading C¢M¢Inbox Select the SMS/MMS tab. I ö Options Different functions are offered depending on the situation. §Options§ Open menu. View Read the SMS/MMS or the notification about an MMS.
PAGE 50
left page (50) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) SMS/MMS Select Open item Save item Opens submenu for Call, Save to contact, Open link, etc. depending on the text selection. The contents of the MMS are listed for playback with the media player or for saving. The contents of the MMS are listed for saving in the relevant folder. Move to archiv. Moves the selected message to the archive. Open attach. Open an attachment. Save attach. Opens the relevant folder in My Stuff for saving.
PAGE 51
right page (51) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) SMS settings MMS settings C ¢M¢Settings¢SMS C ¢M¢Settings¢MMS Normally the basic settings have already been made by the service provider. Normally the basic settings have already been made by the service provider. Send options Send options Set send options: Message center, Default recipi., Transm. rpt., SMS via EGPRS, Validity period, Direct reply = Set send options: Transm. rpt.
PAGE 52
left page (52) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) SMS/MMS C ¢M¢Settings Auto-delete Zoom in If you switch on this function, old messages in the inbox will be deleted automatically when the message memory is full. ¢Select function. You can select one of three specified text sizes for presenting a message. Emoticons Emoticons are small symbols (smileys) with which you can show your feelings in pictorial form.
PAGE 53
right page (53) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) 53 E-mail © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Email.fm Your phone has an e-mail program (client). You can use it to create and receive e-mails. Writing/sending C ¢M¢Create new¢E-mail Enter text. J You will find information on writing texts with and without T9 in the chapter "Text input", (page 26). A Enter e-mail address or ú open menu, then select Add from †, select recipient from Contacts.
PAGE 54
left page (54) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) E-mail Add Cc: Add address(es) of copy recipient(s). Add Bcc: Add address(es) of copy recipient(s) who are not visible to the other recipients. Receiving/reading C¢M¢Inbox Select the E-mail tab. Before an e-mail can be read, it must be retrieved from the server. Remove recip. Remove recipient. ú Insert textö Template (page 28) Signature Open. sentence Contact details Bookmark Open menu, then select Retrieve e-mail or Ret. content.
PAGE 55
right page (55) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Draft C¢M¢Draft¢E-mail The list of drafts is displayed. © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Email.fm Sent C¢M¢Sent¢E-mail The list of messages sent is displayed. Outbox C¢M¢Outbox¢E-mail The list of messages not sent is displayed. Failure may be caused by loss of network connection. Msg. archive C ¢M¢Msg. archive¢E-mail Messages are saved in the archive. Select tab and read required message(s).
PAGE 56
left page (56) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) E-mail Change profile settings I Select the fields to edit. Connect. list List of preferred accesses. User name: Your name. E-mail address: Your e-mail address, e.g.: name@domain.abc Reply address: E-mail address where replies to your mails will be sent. User ID: User ID for your e-mail account. Password: Password for your e-mail account. POP3 server: Enter Internet address if the server type is POP3 and SMTP.
PAGE 57
right page (57) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_WAPPush.fm WAP push Msg settings WAP push messages are transmitted from special service centres. If, for example, you have requested configuration data from your service provider this will be transmitted via WAP push. §Options§ C¢M¢Settings ¢WAP push transmitted data/programs and, if applicable, start a download.
PAGE 58
left page (58) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Chat room Chat room b You can chat on your phone or PC with dialogue partners who are also registered for this service. Your partners are entered in contact lists for this and selected from them for a private or group dialogue. Similarly, you can be invited to a dialogue by other subscribers. (IMSG = Instant Messaging) GPRS must be switched on. Start menu (offline) If Autom. login is activated the main overview is displayed immediately.
PAGE 59
right page (59) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Instantmsg.fm Main overview (online) After you have logged in successfully, depending on your service provider you will see up to 5 tabs as described below: Conversations IM contacts I F Info messages ü/J Conversations The following are shown in the list: • Online contacts in ongoing conversation. • Offline contacts with unread messages. • Joined groups.
PAGE 60
left page (60) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Chat room Invite Invite the contacts in your own group to join the dialogue. Delete member Delete contact from the list of members. IM contact Save contact in the current contact list on the server. Settings Settings for auto login. Block contact No more messages are received from the contact and the contact receives no status information from you. Message to ID Enter ID manually.
PAGE 61
right page (61) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Instantmsg.fm Delete contact Delete contact from the list. Contact lists Display your personal contact lists. Create new contact list: select New entry and assign an ID and a name. Block list Display the list of rejected contacts. For further functions see page 59. IM groups Display all groups created by you or in which you are yourself a member.
PAGE 62
left page (62) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Chat room Info messages Saved convers. Display messages such as invitations to a group, server messages or other system messages. Display permanently saved dialogues. ö Display selected message. Or ö Reply to invitation/ requests. To reject, open §Options§ menu and select Deny. ö Display selected dialogue. Saved dialogues can be renamed or deleted via the §Options§ menu. © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_06031
PAGE 63
right page (63) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) 63 Voice mailbox/Mailbox © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Mailbox.fm C ¢M¢Voice mailbox Save call divert number Most service providers provide a mailbox in which a caller can leave voice mail for you • if your phone is switched off or not ready to receive, • if you do not want to answer, • if you are making a phone call (and Call waiting is not activated, page 80).
PAGE 64
left page (64) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) CB services CB services C ¢M¢CB services b Some service providers offer information services (info channels, Cell Broadcast). If reception is activated, you will receive messages on the activated topics in your Topic list. CB messages are displayed in standby mode; longer messages are scrolled automatically. Receive CB ñ Activate/deactivate CB-service. If the CB service is activated, standby time for the phone will be reduced.
PAGE 65
right page (65) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Internet C ¢O¢Internet © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Internet.fm ¢Select function. Get the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can visit wap.BenQ-Siemens.com ("Downloads") where you can download or update games, applications, sounds, graphics and more for your phone.
PAGE 66
left page (66) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Internet Internet End connection Calling the function opens the browser with the preset option. Browser menu §Options§ Open menu. Homepage Call up the preset homepage of the current profile. Bookmarks • List bookmarks Display list of bookmarks stored in the phone. • Bookmark site The current page is saved as a bookmark. Go toö Enter URL to dial an Internet address directly, e.g. wap.BenQ-Siemens.com. Reload Reload current page.
PAGE 67
right page (67) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Enter special characters *, 0 © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Internet.fm Select important special characters. Your Internet browser is licensed by: Connection settings Handling depends on the service provider (see also Online settings, page 77). History Display most recently visited Internet sites. Browser settings C ¢O¢Internet §Options§ Open menu. Settings Select.
PAGE 68
left page (68) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Settings Settings Profiles C ¢T¢Profiles Several settings can be stored in a phone profile so that the phone can be adapted, for example, to the surrounding level of noise. • Six profiles are provided with default settings. These can be changed, however: General Silent Meeting Outdoor Car Kit Headset • You can name two personal profiles (). Switching on I Select default profile or personal profile. ì Activate the profile.
PAGE 69
right page (69) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Profile options © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Profiles.fm §Options§ Open menu. Activate Activate selected profile. Change sett. Change profile settings. Copy from Copy settings from another profile. Rename Change personal profile (except default profiles).
PAGE 70
left page (70) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Settings Ringtones C ¢T¢Ringtones ¢Select function. Volume Different options are available depending on the function: Tunes I Select a ringtone from My stuff. Set the volume. Ringer setting Ring Play back the ringtone or melody at the set volume. Confirm setting. Ascend Set ringtone to a rising volume. Melody settings Beep You can also make individual settings for the following functions: Reduce ringtone to a short beep.
PAGE 71
right page (71) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:42) Settings Topics © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Themes.fm C ¢T¢Topics Load a completely new visual presentation onto your phone. Various media settings are reorganised on a theme basis at the press of a key, e.g. • Animations • Sounds • Color skins • Background Theme files are compressed to save memory space. On activation, Theme packages are extracted and registered automatically.
PAGE 72
left page (72) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:06) Settings Display Code protection: C ¢T¢Display The phone code is requested to close the screensaver. Background Set wallpaper graphic for the display. Note The Digital clock/Animations screensavers reduce your phone's standby time. Logo Start up anim. Choose picture to be displayed instead of the provider logo. Select animation to be shown when the phone is switched on. Screensaver Shutdn anim.
PAGE 73
right page (73) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Settings Silent alert © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Vibration.fm C ¢T¢Silent alert To avoid the disturbance caused by a ringtone, you can activate vibration as an alternative. The vibration can be switched on in addition to the ringtone (in a noisy environment, for example). This function is deactivated when the battery is being charged and accessories are connected (except the headset).
PAGE 74
left page (74) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:27) Settings Connectivity C ¢T¢Connectivity ¢Select function. EGPRS (EDGE) ì Activate/deactivate EGPRS. EGPRS is a method for transmitting data in the mobile network faster than with GPRS. Use EGPRS and if the network has sufficient capacity, you can be connected to the Internet permanently. Only the actual transmission time is charged by the network operator. Some service providers do not yet support this service.
PAGE 75
right page (75) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:27) ì Activate/deactivate Bluetooth. © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Connectivity.fm If Bluetooth is activated, standby time for the phone will be reduced. Shown in the display © Bluetooth visible to others. Bluetooth headset. ª PC ì Bluetooth activation. My BT name: You can give the phone a name when you activate Bluetooth for the first time.
PAGE 76
left page (76) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:27) Settings • Last connected My BT name List of most recently and/or still connected devices. The phone is given a name (max. 20 characters) – this is the name the partner sees. If no name is given, the phone uses the non-changeable device address. • Reject list Attempts to make connections to devices in this list are rejected. • Last srch result List of the last devices found. List options Different functions are offered depending on the list.
PAGE 77
right page (77) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:27) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Connectivity.fm 77 • Always visible Selecting profile. Your phone is always "visible" to other BT devices. These devices can create a connection to your phone and be added to the known device list if necessary. I ì BT aud. stream When a Bluetooth headset is used, all audio signals are transmitted to this exclusively.
PAGE 78
left page (78) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Settings Shortcuts C¢T¢Shortcuts Softkeys You can assign a function to the softkeys. Editing I ñ I ì Select key. Call up the edit function. Scroll to new assignment in the list. Confirm. Additional information The service provider may have already assigned functions to all the keys (e.g. access to "SIM services" or direct call-up of the Internet portal). It may not be possible to modify this key assignment.
PAGE 79
right page (79) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_ShortCuts.fm Assigning numbers or functions Apply I ñ I ì Select the key. Start a stored application (e.g. Internet). Call up the edit function. In standby mode: Choose application from the list. 3 Confirm selection. 79 Press briefly. The assignment of the number key 3 is displayed above the right softkey e.g.: §Internet§ Press and hold.
PAGE 80
left page (80) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Settings Call settings All calls All calls are diverted. C ¢T¢Call settings Ç ¢Select function. b Hide ID When you make a call, your phone number can be displayed on the recipient's display (depending on the service providers). To suppress this display, you can enable the "Hide ID" mode for all subsequent calls or just for the next call. You may need to register separately with your service provider for these functions.
PAGE 81
right page (81) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_CallSetup.fm 81 Status check Minute beep You can check the current divert status for all conditions. After a short pause, the current situation is transmitted by the network and displayed. During the call, you will hear a beep after each minute as a reminder of the time elapsed. The recipient normally does not hear this beep. Clear all All set diverts are cleared.
PAGE 82
left page (82) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Settings Phone settings C ¢T¢Phone settings ¢Select function. Language Display lang. Set the language for the display text. When Automatic is set, the language of your service provider is used. If a language that you do not understand happens to be set, the phone can be reset to the language of your home service provider with the following input (in standby mode): *#0000# A Input language Select the language for text input.
PAGE 83
right page (83) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_PhoneSetup.fm File system Device check Format (Phone-code protected) The phone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted. To format the file system, unplug the SIM card, restart the phone and enter * # 9 3 3 7 #. A self-test and individual tests are offered. If you select Self test, all individual tests are carried out.
PAGE 84
left page (84) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Settings Device manag. The device manager can be used, for example, to transfer configuration data from the service provider via WAP push (page 57). The phone default setting varies from service provider to service provider: • The settings have already been implemented by the service provider. You can start immediately. • The access profiles must be configured manually. If necessary, contact your service provider.
PAGE 85
right page (85) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Settings Clock City list C ¢T¢Clock ¢Select function. © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Clock.fm Time/date The clock must be set to the right time once at start-up. ì J I Select a city in the selected time zone. or §Options§ Open menu and select Search city. Time format Start editing. Select 24h or 12h. First enter the date (day/month/year), then the time (hours/ minutes/seconds).
PAGE 86
left page (86) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Settings Security C ¢T¢Security ¢Select function. Auto key lock The keypad is locked automatically if no key has been pressed for a specific (pre-determinable) time. This prevents the phone from being used accidentally. However, you can still receive calls and make an emergency call. H J Select Set. Enter time in minutes and seconds after which the keypad lock is to be activated.
PAGE 87
right page (87) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) PIN code When roaming For description, see page 18: You do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls. PIN control, Change PIN, Change PIN2, Chg.phonecode Call blocking © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Safety.fm 87 b Barring restricts the use of your SIM card (this is not supported by all service providers).
PAGE 88
left page (88) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Settings Network Network info C ¢T¢Network The list of GSM networks currently available is displayed. ¢Select function. Line b This function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone. Select line ñ ã Change the connection. Display the current phone number. Protected (Phone-code protected) You may limit usage to one phone number.
PAGE 89
right page (89) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Network.fm ñ User group Confirm change, then select a new service provider from the list. Record service provider again (last entry in the list): Furth.network Select, enter the provider data and save it. Additional information If you are outside your home network, your phone automatically dials another GSM network.
PAGE 90
left page (90) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Settings Accessories C ¢T¢Accessories ¢Select function. Car Kit Only in combination with an original wired handsfree car kit (see Accessories, page 141). The car kit profile is activated automatically when the phone is connected to the car kit. Edit profile See page 69. Auto answer (Factory default: off) Calls are accepted automatically after a few seconds (only if the car ignition is on).
PAGE 91
right page (91) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_SetAccessory.fm 91 Headset Upload via USB Only in conjunction with an original headset (see Accessories, page 141). If an original headset is used the profile is automatically activated when the headset is plugged in. If the phone is connected with the data cable to a PC, the battery can also be charged in this way (only with original accessories, page 141).
PAGE 92
left page (92) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Organizer Organizer Calendar C ¢Q¢Calendar You can enter appointments in the calendar. Time and date must be set for the calendar to work correctly. The calendar offers you three views: Monthly view Special appointments are highlighted in colour. I Press briefly to go forward/back a week. Press and hold to go forward/back a month. F Press briefly to go forward/back a day. ì Open daily view.
PAGE 93
right page (93) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Appointments C¢Q¢Appointments Different input/selection fields are displayed depending on the type. The number of fields can be restricted, see Default at the end of the list. Enter new appointment Description: Description of nature of appointment. Appointments are displayed in chronological order in a list. © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Organizer.fm 93 Select.
PAGE 94
left page (94) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Organizer Information on the alarm Alarm: On/off or Silent alert. J Enter the period of time before the appointment and select the time unit: Minutes, Hours, Days Recurrence: Select a timeframe for repeating the appointment: No, Daily, Weekly, Monthly, Yearly Enter a parameter for repeating: Forever, Until, Events (number) If Weekly is selected, certain weekdays can be highlighted.
PAGE 95
right page (95) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Tasks Notes A task is displayed like an appointment in the agenda for the selected day. However, unlike an appointment it does not require a time. When no time is entered the task appears at the top of the list every day until it is marked as completed. Write and manage brief text notes. Protect confidential information with the phone code (do not save any important data or the PIN for credit cards etc. here).
PAGE 96
left page (96) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Organizer Organiser options Dictat.machine Depending on the application used (Calendar,Appointments, Tasks, Notes) and the current situation, different functions are offered. Use the dictating machine to record short voice memos. §Options§ Delete by Open menu. Delete all entries prior to a certain date. Delete done Delete all completed tasks. Activate/ Deactivate Switch alarm on/off. Done Set task to completed/ in progress.
PAGE 97
right page (97) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Organizer.fm ó/ô Switch between pause/ record. §Stop§ End recording. Recording is saved with the prefix ’voice’ and a consecutive number. Rename with §Options§. Playback (via Media player) I Select the desired recording. ò/ ó Switch between playback/pause. D/E Press and hold for fast forward and rewind. Dictating machine options §Options§ Open menu.
PAGE 98
left page (98) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Organizer Remote synchronisation C¢Q¢Remote sync. You can use this function to synchronise the personal data on your phone (contacts, notes, calendar entries) with a remote server. The external data can, for example, be saved on a company computer. A request to synchronise data can also be received via WAP push (page 57). The user, however, must agree to the start. Settings and functions I Select the desired function. ö/ñ Display.
PAGE 99
right page (99) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Contacts, Appointments, Tasks, Notes © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Organizer.fm Mark application(s) whose data is to be synchronised. You can set the synchronisation mode for each application separately. Synchronisation modes You can choose between six modes for each application. The mode will influence the amount of data transferred and the result.
PAGE 100
left page (100) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Extras Extras SIM services (optional) Calculator Your service provider may offer special applications such as mobile banking, share prices, etc. via the SIM card. The calculator is offered in a basic version and with an advanced range of functions. C¢S¢SIM services If you have such a SIM card, the SIM services will appear in the main menu under "Extras" or directly above the softkey (on the left). i Symbol for SIM services.
PAGE 101
right page (101) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Extras.fm Basic functions +, -, *, / Basic calculation types = Result 1/x Reversion % Convert to percentage . Decimal point ± Sign change "+" / "–" §AC§ New calculation Extended functions: §Options§ Open menu, then select Extended mode.
PAGE 102
left page (102) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Extras Special key functions: * # Set the decimal point. Change the preceding sign. Currency When you call up the function for the first time, you must enter currencies into which the conversions are to be made. Online status The application can be called up from various other applications, such as Chat room or Contacts. b In Online status you can set such attributes as Availability or Mood.
PAGE 103
right page (103) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) My logo: Select your personal logo (start via §Options§ My stuff or Camera). © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Extras.fm My mood: Indicate your personal mood. MSG lists (Instant Messaging lists) Access to the following lists: b Pend. requests Display the current requests for your personal attributes. Watcher list Display who is watching your attributes.
PAGE 104
left page (104) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Extras Start the recording from another application: ì Back to application. Playback (via Media player) I Select the desired recording. ò/ó Switch between playback/pause. D/E Press and hold for fast forward and rewind. §Options§ Open menu. Stopwatch C¢S¢Stopwatch The stopwatch can work with lap times and intermediate times. With Lap timing, each time a time is taken the stopwatch returns to zero.
PAGE 105
right page (105) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Countdown © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Extras.fm C¢S¢Countdown A set time elapses. The last 4 seconds are indicated by a beep. At the end a special beep sounds. Display, also in standby mode. J Enter period of time Or I ò select standard timing. Start countdown. Standard timings It is possible to call up or set five timings with different countdown times.
PAGE 106
left page (106) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Extras Change menu You can replace each entry (1–10) with another entry from the selection list. I Select the required entry. §Change§ The function list is opened for selection. I Select the new entry from the list. ì Confirm. The entry is saved. © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Extras.fm Template: X75, 143x105 mm, Version 2.
PAGE 107
right page (107) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Alarm clock Setting the days for an alarm © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Alarmclock.fm C¢ U The alarm sounds at the set time even when the ringtones or the phone are switched off. The alarm clock is activated automatically after a change is made. §Off§ Press to end the alarm. ¹Alarm clock 18:45 ¹ §Options§ Open the menu and select Set days. I Switch between the days of the week.
PAGE 108
left page (108) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Media player Media player Play list Starting from an application All playlists (file format: *.m3u) are displayed. When you are viewing a picture/video or listening to a melody, the application starts a media playback. Pictures All supported picture formats are displayed. Direct key for the media player Videos All supported video formats are displayed. ? Press.
PAGE 109
right page (109) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_MediaPlayer.fm * Switch to mute and off mute. §Stop§ End playback. For further services, see §Options§ page 109. Play list Several pieces of music are compiled in a playlist (*.m3u). §Options§ Open menu, select New and then Play list. Edit playlist options §Options§ Open menu. Add track Playlists in "*.
PAGE 110
left page (110) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Media player Play/Pause Play back the current media file or pause. Sendö Select the media source such as My stuff, Bookmarks or URL. Select transmission service and medium for sending. Open Printö New Select an application to create a new object or a new playlist for music. Printout on a suitable terminal via Bluetooth or USB. To background Put Media player into the background. Zoom Activate zoom mode.
PAGE 111
right page (111) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) 111 © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_MediaPool.fm My stuff To organise your files, you can use the file system like a PC file manager. There are separate folders for the various data types in My stuff. C¢ N The list of the folders and files is displayed. I Select file or folder. ì/ö Open folder and select file or link.
PAGE 112
left page (112) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) My stuff My stuff options Different functions are offered depending on the starting situation and the object. §Options§ Open menu. New folder Create a new folder and name it. Attributes Display information on file or folder selected. Move/Copy Select file(s) or folder, then select destination folder and insert with ì. License mgr. Handling of DRM rights.
PAGE 113
right page (113) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_MediaPool.fm Directory structure Other Separate folders have already been created for different data types in My stuff. These folders cannot be changed.
PAGE 114
left page (114) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Mobile Phone Manager Mobile Phone Manager The MPM (Mobile Phone Manager) enables you to use extended phone functions from your PC. The phone and PC communicate via a data cable (see Accessories, page 141) or Bluetooth. You can download the latest version of the MPM software from the Internet at: Call Control You can dial straight from the Organiser on a mouse click.
PAGE 115
right page (115) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_PhoneManager.fm 115 Backup and Restore Phone explorer With the back-up function, you can regularly make a back-up copy of your phone data on the PC. If you ever lose the data on your phone, or replace the phone, you can quickly reinstate all data with the restore function. Please observe any possible restrictions for DRM-protected data.
PAGE 116
left page (116) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Mobile Phone Manager Picture and Photo Processing Plug & Sync Picture/photo processing offers you the opportunity to conveniently create, edit and manage pictures and photos. Filters and effects are offered to help you create colourful, attractive graphics. The user-friendly interface makes child’s play of transferring pictures/photos from or to the mobile phone, and of changing the graphic settings.
PAGE 117
right page (117) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:18) 117 Questions & Answers © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_FAQ.fm If you have any questions about using your phone, visit us anytime at www.BenQMobile.com/customercare.For additional help, we have listed below some frequently asked questions and answers. Configuration service To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet, you can use a configuration service.
PAGE 118
left page (118) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:18) Questions & Answers Problem Possible causes Possible solution Charging error (charge icon not displayed). Battery totally discharged. 1) Plug in charger cable, battery is on charge. 2) Charge icon appears after approx. 2 hours. 3) Charge battery. Temperature out of range: 5 °C to 45 °C. Make sure the ambient temperature is right, wait for a while, then recharge. Contact problem. Check power supply and connection to the phone.
PAGE 119
right page (119) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:18) © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_FAQ.fm Problem Possible causes 119 Possible solution Impossible to make Contacts list is full. entries in contacts. Delete entries (see Standard functions, page 22). Voice mailbox not functioning. Call divert to mailbox not set. Set call divert to mailbox (page 63). å flashes. SMS memory is full.
PAGE 120
left page (120) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:18) Questions & Answers Problem Possible causes Possible solution PIN error/ PIN2 error Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, contact your service provider. Phone code error. Three wrong entries. Contact the Service (page 121). Service provider code error. Contact your service provider. No authorisation for this service.
PAGE 121
right page (121) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) 121 © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_Hotline.fm Customer Care We offer fast, individual advice! You have several options: Our online support on the Internet: www.BenQMobile.com/customercare We can be reached any time, any place. You are given 24 hour support on all aspects of our products.
PAGE 122
left page (122) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Customer Care Pakistan ..........................................02 15 66 22 00 Paraguay ..........................................8 00 10 20 04 Peru ..................................................0 80 05 24 00 Philippines ........................................0 27 57 11 18 Poland.............................................08 01 30 00 30 Portugal ............................................8 08 20 15 21 Qatar..............................
PAGE 123
right page (123) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) 123 © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_Maintenance.fm Care and maintenance Your phone has been designed and manufactured to the highest of standards and should be treated with great care. The suggestions below will help you to enjoy your phone for many years. • Protect your phone from moisture and humidity. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
PAGE 124
left page (124) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:07) Product data Product data Declaration of conformity BenQ Mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The relevant declaration of conformity (DoC) has been signed. Please call the company hotline if you require a copy of the original: www.BenQMobile.
PAGE 125
right page (125) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) 125 SAR © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_SAR.fm INFORMATION ON RF EXPOSURE / SPECIFIC ABSORPTION RATE (SAR) THIS MODEL MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES Your cellular phone is a radio transmitter and receiver. It is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (FCC, USA) and by Health Canada.
PAGE 126
left page (126) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) U.S. FDA U.S. FDA The U.S. Food and Drug Administration's (FDA) Center for Devices and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is know – and what remains unknown – about whether these products can pose a hazard to health, and what can be done to minimize any potential risk.
PAGE 127
right page (127) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_FDA.fm How much evidence is there that handheld mobile phones might be harmful? Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods.
PAGE 128
left page (128) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) U.S. FDA pected to bear on the accuracy and repeatability of these results.1 research based on such recommendations. 2. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material.
PAGE 129
right page (129) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_FDA.fm FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones.
PAGE 130
left page (130) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) U.S. FDA to the user that is not necessary for device function; and • Cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health. • At the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level.
PAGE 131
right page (131) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Where can I find additional information? © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_FDA.fm For additional information, see the following websites: • Federal Communications Commission (FCC) RF Safety Program (select “Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters”): www.fcc.
PAGE 132
left page (132) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) FCC/Industry Canada Notice FCC/Industry Canada Notice Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, please contact your local service facility. This device complies with part 15 of the FCC rules.
PAGE 133
right page (133) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_Intellectual_property.fm 133 Intellectual property Intellectual Property Restrictions All Intellectual Property, as defined below, which is owned by or otherwise the property of BenQ Mobile GmbH & Co.
PAGE 134
left page (134) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Ten Driving Safety Tips installed mounted device for your phone or a speaker phone accessory, take advantage of these devices if they are available to you. Ten Driving Safety Tips Your BenQ wireless phone gives you the power to communicate by voice – almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
PAGE 135
right page (135) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_Driving_Tips.fm you begin your trip, or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip – dial only a few numbers, check the road and your mirrors, then continue. Do not engage in stressful or emotional conversations that may be distracting.
PAGE 136
left page (136) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) End user license agreement End user license agreement This Software License Agreement ("Agreement") is between You and BenQ Mobile GmbH & Co. OHG, Germany and/or one of its affiliates ("Licensor").
PAGE 137
right page (137) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_EndUserLic.fm 3. Limitations on end user rights. (a) You may not copy, distribute, or make derivative works of the Software. (b) You may not use, modify, translate, reproduce or transfer the right to use the Software or copy the Software except as expressly provided in this Agreement.
PAGE 138
left page (138) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) End user license agreement 4. Copyright. 6. Commencement & termination. Licensor and/or its software suppliers and their respective affiliates own the Software and all rights, including without limitation including proprietary rights therein, are protected by international treaty provisions and other applicable national laws of the country in which it is being used.
PAGE 139
right page (139) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) © Siemens AG 2004, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\STD_FCC_EndUserLic.fm 8. Not fault tolerant. The Software may contain technoloy that is not fault tolerant and is not designed, manufactured, or intended for use in environments or applications in which the failure of the licensed Software could lead direclty to death, personal injury, or severe physical or environmental damage or financial loss. 9. Limitation of liability.
PAGE 140
left page (140) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) End user license agreement 10. Technical support. 12. Applicable law & general provisions. Licensor has no obligation to furnish You with technical support except as agreed in writing between You and Licensor in the Limited Warranty provided with the phone. This Agreement shall be governed by and construed in accordance with the laws of the State of California without regard to its conflicts of laws rules.
PAGE 141
right page (141) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:19) 141 Accessories © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_Accessory.fm Products can be obtained in specialist shops or you can visit the Mobile Store online. Original Accessories www.BenQMobile.
PAGE 142
left page (142) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:19) Accessories Car Solutions Car Kit Portable HKP-100 The portable handsfree car kit can easily be moved from one car to another. Simply plug into the cigarette lighter socket, connect, and talk. Car Kit Bluetooth® Easy HKW-100 Compact, easy to install and to operate Bluetooth® Car Kit - simply plug into the cigarette lighter socket.
PAGE 143
right page (143) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Menu tree Contacts > All contacts © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_MenuTree.fm Groups Online status SIM Filter Call records > Missed calls Calls received Calls dialed Delete records Time/charges > Last call All incom. calls All outg. calls Remain. units Charge settings Internet > URL/service provider Download wiz.
PAGE 144
left page (144) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Menu tree Messages > Inbox > SMS, MMS E-mail Draft > SMS,MMS E-mail Sent > SMS,MMS E-mail Outbox Chat room > SMS,MMS E-mail Voice mailbox WAP push CB services > Receive CB Read new CB Topic list Auto display Use Topic index CB languages Msg. archive > SMS,MMS E-mail Templates > Text templates MMS templates Settings > Zoom in Emoticons Save aft. send Auto-delete SMS MMS E-mail WAP push © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG
PAGE 145
right page (145) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Organizer > Calendar Appointments Tasks © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_MenuTree.fm Notes Games Dictat.machine Media player Time zones Alarm clock Remote sync. Extras > SIM services My applications Calc.
PAGE 146
left page (146) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Settings Menu tree > Topics Display > Background Logo Screensaver Start up anim. Shutdn anim. Welcome text Backlight timer Lighting Silent alert Connectivity > Bluetooth EGPRS EGPRS info B-tooth setup Online settings Fax/data Shortcuts > Softkeys Fast dialing key Navigation keys Number keys Call settings > Hide ID Call waiting Forward Call screening Any key Minute beep © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\S
PAGE 147
right page (147) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Settings > Phone settings > Language User dictionary Key tones © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_MenuTree.fm Info tones Auto off Memory assis. File system License mgr. Phone identity Device manag. Fact.
PAGE 148
left page (148) of EL71 SWIFT FCC FUG am, (16.03.2006, 15:43) Settings Menu tree > Network > Line Network info Choose netwrk Auto network Preferred net Band selection Fast search User group Accessories > Car Kit Headset Upload via USB © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_MenuTree.fm Template: X75, 143x105 mm, Version 2.
PAGE 149
right page (149) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:33) 149 Index © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_FUGSIX.fm A Accept list........................................... 57 Accessories ....................................... 141 Alarm ................................................. 94 Alarm clock....................................... 107 Alert calls from ................................... 81 All calls (diversion)..............................
PAGE 150
left page (150) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:33) Index Emergency number ............................ 19 End user license agreement .............. 136 Extras ............................................... 100 F Factory settings .................................. 84 Fast access.......................................... 78 Fast dialling key .................................. 78 Fast network search ............................ 89 Flash ..................................................
PAGE 151
right page (151) of EL71 SWIFT FCC FUG am, (17.03.2006, 08:33) Provider logo ...................................... 72 PUK, PUK2 .......................................... 23 Putting a call on hold ....................32, 34 Q Questions & Answers ........................ 117 © Siemens AG 2003, Z:\EL71_SWIFT\output\FUG\Swift_FCC_am_060313_te\SWIFT_FUGSIX.fm R Receiving signal .................................. 20 Records .............................................. 41 Reject list ......................