User's Manual

Contacts54
© BenQ Mobile 2006, Z:\EF81_KESTREL_1\output\FUG\KESTREL_FCC_us-en_060126_te_druck\Kestrel_Contacts.fm
left page (54) of EF81 KESTREL FCC us-en, (31.01.2006, 10:24)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 051116
Recording a voice tag
Record the voice tag in a quiet envi-
ronment. You should speak into
the phone from a distance of about
25 cm. The voice tag may be 3 sec.
long.
F
Open the Contacts tab.
I
Select a contact.
I
Select number input field.
§Options§ Open menu and select
Record voice tag.
§Start§ Start recording.
A short signal is sounded. An
appropriate prompt appears on
the display. Speak the name (max.
3 seconds). Repeat the name after
playback. A second signal tone is
sounded and you are prompted on
the display.
C
Confirm completed
recording.
If your two recordings are too differ-
ent or if they are too similar to an ex-
isting voice tag, you will be prompt-
ed to repeat recording.
§Retry§/§Restart§
Press to start recording
again.
If three attempts fail you have to
start a new voice tag.
Voice-activated dialling
Clamshell closed
If a headset is plugged into the
phone: Press the activation key
on the headset to activate voice
dialling.
Clamshell open
G
Press and hold.
Speak the name after the signal
tone. If the name matches the saved
voice tag the number is dialled.
If you use voice-activated dialling mainly
with a handsfree set it is useful to record
the voice tag with the handsfree set.
If there is not enough memory for a new
voice tag, a notification is displayed. Con-
firm notification, delete existing tags and
try again.
You can assign the voice dialling function
to any shortcut key (page 128).