User's Manual

43Calling
right page (43) of EF81 KESTREL FCC us-en, (31.01.2006, 10:49)
© BenQ Mobile 2006, Z:\EF81_KESTREL_1\output\FUG\KESTREL_FCC_us-en_060126_te_druck\Kestrel_Phone.fm
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 051116
Accepting the waiting call in addition to
the first
Ý Accept the waiting call.
Depending on your settings
(page 131) you can also accept the
waiting call by simply opening the
clamshell.
If the clamshell is closed, press
‡
to swap between the calls.
Or (if the clamshell is open)
§Swap§/
A
Accept the waiting call.
The current call is put on hold.
To swap between the two calls when
two connections are established,
always press
A
.
Rejecting the waiting call
µ Press.
Or (if the clamshell is open)
§Reject§ Press.
Accepting the waiting call, ending the
current call
(Only if the clamshell is open)
B
End the current call.
C
Accept the new call.
Ending calls
Clamshell closed
µ
Press. You return to the
held call.
Clamshell open
B
Press the End key briefly.
Or
§Options§ Open menu and
select Drop.
After the Return to held call? display,
you have the following options:
§Yes§ You accept the held call.
§No§ You end the held call.
Conference b
(Not during video calls)
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be
enabled specially.
You cannot establish a conference when
the clamshell is closed.
When closing the clamshell you can con-
tinue an ongoing conference if you are in
handsfree mode (page 31).