User's Manual

137Settings
right page (137) of EF81 KESTREL FCC us-en, (31.01.2006, 10:24)
© BenQ Mobile 2006, Z:\EF81_KESTREL_1\output\FUG\KESTREL_FCC_us-en_060126_te_druck\Kestrel_Security.fm
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 051116
Settings Security
C ¢ T ¢ Security
¢ Select function.
Auto key lock
If activated, the keypad is locked au-
tomatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call. The
setting is also valid for the outer
softkeys.
On/Off Activate/deactivate and
confirm with
C.
Only protect. SIM b
(PIN2 or phone-code protected)
Dialling options are restricted to the
SIM protected numbers in the con-
tacts. If only area codes are entered,
relevant numbers can be added to
these manually before dialling.
If the SIM card does not support PIN2
input, all the contacts can be protect-
ed with the phone code.
On/Off Activate/deactivate and
confirm with
C.
PIN codes
Description on page 33:
PIN control, Change PIN, Change PIN2,
Change phonecde
This SIM only b
(PIN2 or phone-code protected)
The phone can be linked to a SIM
card when the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a
different SIM card, enter the phone
code when requested.
On/Off Activate/deactivate and
confirm with
C.
Barrings b
Barring restricts the use of your
SIM card (not supported by all ser-
vice providers). You need a 4-digit
network password for network bar-
ring. Your service provider will sup-
ply you with this password. You may
need to register separately for each
barring.
Activate/deactivate Barrings
C
Confirm warning
message.
I
Select call type described
below and confirm
with
C.
Activate/Deactivate
Select and confirm
with
C.
The keypad can also be directly locked and
unlocked in standby mode. In each case:
#
Press and hold.
Or (if clamshell is closed)
Ä
Press and hold.