User's Manual

Settings130
© BenQ Mobile 2006, Z:\EF81_KESTREL_1\output\FUG\KESTREL_FCC_us-en_060126_te_druck\Kestrel_CallSetup.fm
left page (130) of EF81 KESTREL FCC us-en, (31.01.2006, 10:56)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 051116
Divert other call types
All calls/Data/Fax/Messages
Select a call type and
confirm with
C.
§Options§ Open menu and select Set.
J
Enter the number you
want to divert to. Or se-
lect Contacts from the op-
tions menu and select a
contact.
Check status
b
§Options§ Open menu and select
Check status.
You can check the current divert
status for all conditions. After a
short pause, the current situation is
transmitted by the network and
displayed.
Clear all
b
§Options§ Open menu and select
Clear all.
All set diversions are cleared.
Confirm with
C.
All calls
b
All calls are diverted.
Ç
Symbol in the top line of
the display in standby
mode.
Unanswered
b
A call is diverted in the following sit-
uations: Not reachable, No reply, Busy
(see below).
Not reachable
b
A call is diverted if the phone is
switched off or is out of range.
No reply
b
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
b
A call is diverted if another call is in
progress. If you activated Call waiting
(page 129), you will hear the call
waiting tone during a call (page 42).
Fax
b
Fax calls are diverted to a number
with a fax connection.
Data/Messages
b
Data calls are diverted to a number
with a PC connection.
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Reactivate divert: The last divert has been
stored. Proceed as with "Set divert". The
stored number is displayed. Confirm
number.