User's Manual

77Settings
right page (77) of E71 Obsidian, FCC, am (09.08.2006, 15:36)
BenQ 2006, G:\Mobil\X85\E71_Obsidian\fcc_voher_diese_mail_lesen\FM\OBSIDIAN_Settings.fm
Template: Minion, 140x105 mm, Version 1.6; VAR Language: am; VAR issue date: 060714
Busy
Divert occurs if a call is in progress.
If Call waiting is activated, you will hear
the call waiting tone during a call.
Receiving fax
b
Fax calls are diverted to a number with a
fax connection.
Receiving data
b
Data calls are diverted to a phone
number with a PC connection.
Status check
You can check the current divert status
for all conditions. After a short pause,
the current situation is transmitted by
the network and displayed.
Clear all
b
All set diverts are cleared.
Call settings
C ¢
T
¢Call settings
¢Select function.
Hide ID b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
To suppress this display, you can enable
the Hide ID mode for all subsequent calls
or just for the next call. You may need to
register separately with your service
provider for these functions.
Call waiting b
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it.
Alert calls from b
Only calls from phone numbers that are
in Contacts or on the SIM Card
or assigned to a group are signalled
audibly. Other calls are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for
B).
Minute beep
During the call, you will hear a beep af-
ter each minute as a reminder of the
time elapsed. The recipient normally
does not hear this beep.
Additional information
Note that the divert is stored in the net-
work and not in the phone (e.g. when
the SIM card is changed).
Reactivating divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone
number is displayed. Confirm number.