User's Manual

99Settings
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Connectivity.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
right page (99) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
HTTP profile
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens.com/
mobilephonescustomercare
in the FAQ section.
I
Make the settings.
Authentication
Activate or deactivate encrypted di-
al-up (CSD connections only) for In-
ternet access.
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be en-
abled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
Send voice/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.