User's Manual

Settings98
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Connectivity.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
left page (98) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
• My BT name
The phone is given a name (max.
16 characters) – this is the name the
partner sees. If no name is given, the
phone uses the non-changeable de-
vice address.
• Visib.to others
Set how your phone should respond
to other BT devices. This means (if
“visible”) for example that the device
address or the BT name of your
phone is shown to other BT devices if
they request this in order to receive
or send data.
• Not visible
Your phone is not “visible” to other
BT devices. Known devices such as
Bluetooth-Headset/Car Kit continue
operating.
• Auto mode
Your phone is “visible” to other BT
devices for several minutes. You will
then be asked if “visibility” should
continue.
Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as MMS, WAP.
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens.com/mobilephones-
customercare in the FAQ section.
Select profile
I
Select the profile.
C
Confirm selection.
Set profile
I
Select the profile.
§Options§
Open menu.
§Edit§ Open the selection.
I
Select CSD settings, and/or
GPRS settings.
§Edit§ Make the settings as
specified by your service
provider.
Shown in the display
¨ Bluetooth activated.
©
Bluetooth visible to others.
ª
Bluetooth during data transfer.
«
Call to Bluetooth device ac-
cepted.