User's Manual

SMS56
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_SMS.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
left page (56) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
Setting
SMS signature
C ¢
M
¢Msg settings
¢SMS setup¢SMS signature
You can enter a “signature” with up
to 16 characters. This signature will
then be attached to each SMS except
for a §Reply§ and when changes are
made to an existing SMS.
SMS profiles
C ¢
M
¢Msg settings
¢SMS setup¢SMS profiles
Up to 5 SMS profiles can be set.
These define the transmission char-
acteristics of an SMS. The pre-setting
depends on the SIM card inserted.
Activate profile
I
Select profile.
C Activate.
Set profile
I
Select profile.
§Edit§ Open to edit the profile.
Service
center
Enter the phone numbers for
the service centre as provided
by the service provider.
Recipient
Enter a standard recipient for
the profile.
Message
type
• Manual: Inquiry for all
messages.
• Standard text: Normal SMS
message.
• Fax: Transmission via SMS.
• E-mail: Transmission via
SMS.
• New: You may need to ob-
tain the required code num-
ber from your service
provider.
Validity
period
Period in which the service
centre is to try to deliver the
message:
Manual, 1 hour, 3 hours,
6 hours, 1 day, 1 week,
Maximum*
* Maximum period that the ser-
vice provider permits.
Status re-
port
=
Receive confirmation of suc-
cessful/failed transmission of a
message. This service may be
subject to a charge.
Direct re-
ply =
If activated, the reply to your
SMS message is handled via
your service centre (for infor-
mation, please contact your
service provider).
SMS via
GPRS
=
Send SMS automatically via
GPRS (page 95).
Save aft.
send
Sent SMS messages are
saved in the Sent items list.