User's Manual

Calling36
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Phone.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
left page (36) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
Apply
§Carol§
To dial the phone number
(e.g. Carol’s phone num-
ber), press and hold the
right softkey.
Switch off
#
Press and hold.
J
Enter phone code.
C
Confirm input.
Tone sequences (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists. These
entries are transmitted directly as
DTMF codes (control codes).
C Open the call menu.
Send DTMF
Select.
Using the
Phonebook/Addressbook
Store phone numbers and control
codes (DTMF codes) in the Phone-
book/Addressbook in the same way
as a normal entry.
J
Enter phone number.
0
Press until a “+” appears in
the display (wait for the
connection to be estab-
lished).
J
Enter DTMF codes
(numbers).
0
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
J
Enter a name.
§Save§ Store entry.
You may also store just the
DTMFcodes (numbers) and then
send them during the call.