User's Manual

Calling34
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Phone.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
left page (34) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
When the new connection is
established:
§Toggle§ Swap between calls.
Incoming calls during a call
You may need to register for this ser-
vice with your service provider and
set your phone accordingly (p. 90).
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. You have the following op-
tions:
• Accept the waiting call in addition to
the first
§Toggle§ Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to swap be-
tween the two calls.
• Reject the waiting call
§Reject§ Press.
Or
§Forward§ The waiting call is divert-
ed, for example, to the
mailbox.
• Accept the waiting call and end the
current call
B
End the current call.
C
Accept new call.
End call(s)
B
Press the End key.
After the Return to held call? display,
you have the following selection:
§Yes§ You accept the call on
hold.
§No§ You end the second call
too.
Conference b
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be en-
abled specially.
A connection has already been
established:
C
Open the call menu and
select Hold. The current
connection is maintained.
J
Now dial a new number.
When the new connec-
tion is established...
C
... Open the call menu and
select Conference. The
held call is joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).