User's Manual

19Getting started
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Startup.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
right page (19) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
Operating times
The operating times depend upon
the conditions of use. Extreme tem-
peratures considerably reduce the
phone’s standby time. Therefore,
avoid placing the phone in the sun or
on a heater.
Talktime: up to 300 minutes
(standard battery)
Standby time: up to 250 hours
(standard battery)
Charge icon not visible
If the battery has been discharged
fully, the charge icon is not immedi-
ately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case, the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply unit
included in delivery!
Display while in service
Charge level display during opera-
tion (flat – fully charged):
V W X
A beep sounds when the battery is
nearly flat. The charge level of the
battery is only displayed correctly af-
ter an uninterrupted charging/dis-
charging cycle. Therefore do not re-
move the battery unnecessarily, and
where possible, do not end the charg-
ing process prematurely.
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.