User's Manual

Getting started18
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Startup.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
left page (18) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
• If necessary, use the battery
cover
3.
• Finally, close the cover again.
• Before removing the
RS MultiMediaCard™, carry out
the Eject card function in the My
stuff options menu. This prevents
any data from being lost.
•To remove the
RS MultiMediaCard™, open the
cover and press the card briefly (if
necessary, use the battery cover).
The card will pop out a little and
you can remove it. To finish, close
the cover again.
Charging the battery
Charging procedure
The battery is not fully charged
when delivered. Plug the charger ca-
ble into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least two hours.
Y
Display during charging
Charging time
A flat battery is fully charged after
about 2 hours. Charging is only pos-
sible within a temperature range of
+5 °C to 45 °C (+41°F to +113°F). If
the temperature rises/falls 5°C
above/below this, i.e drops to 32°F
or rises to 122°F, the charge symbol
flashes a warning. The mains voltage
specified on the power supply unit
must not be exceeded.
3