User's Manual

Getting started16
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Startup.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
left page (16) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 11:16)
Getting started
The phone is packaged in dismantled
form and must be re-assembled prior
to using for the first time.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
Inserting SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then push the
SIM card gently inwards
1 (en-
sure that the chamfered corner is
in the correct position). Please do
not use any tools, when removing
the SIM card.
• Insert the battery sideways into
the phone
2, then press it
downwards
3 until it clicks
into position.
• To remove the battery, pull it out
with the retaining tab on the side.
Your phone's dis-
play is supplied
with a protective
film. Remove this
film slowly before
assembling the
phone.
1
2
3