User's Manual

127Extras
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\CX75_Phoenix_1\output\FUG\CX75_fug_am_050509_te_Kontrolle\PHO_Extras.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050429
right page (127) of CX75 FUG am, A31008-H7420-A40-1-4A19 (09.05.2005, 10:58)
Device manag.
C ¢
S
¢Device manag.
If you were informed about software
updates by a push message, you can
establish a connection to the provid-
er's server using the Device manag-
er, so you can download them.
When downloading is finished, you
will be asked to switch the phone off
and on again. Afterwards, the soft-
ware of your phone will be updated.
Please follow the instructions in the
display.
The phone default setting varies
from service provider to service pro-
vider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually. If necessary,
check with your service provider
for details. You will find the cur-
rent settings for the service pro-
vider on the Internet at
www.siemens.com/
mobilephonescustomercare
under "FAQ".
Active profile
A standard profile for downloading
the current software of the operat-
ing system is displayed.
§Sync§ Establish a connection to
the active profile.
Or
§Edit§ Call up profile list.
I
Select profile.
C
Activate profile.
Or
§Edit§ Set profile.
Last connect.
Display last connection.