Datasheet

6
BENNING BENNING BENNING BENNING BENNING BENNING BENNING BENNING
CC 1 CC 3 CM 1-1 CM 1-2 CM 1-3 CM 3 CM 4 CM 6
indicating range – – 2000 2000 2000 2000 4000 4000
basic accuracy 1.9 % 1 % – 2 % 2 % 1 % 1 % 1.9 % 0.7 % 0.7 %
AC voltage – – – 0.1 V – 600 V 0.1 V – 750 V – 0.1 V – 600 V 0.1 V – 750 V
DC voltage – – – 0.1 V – 600 V 0.1 V – 1000 V – 0.1 V – 600 V 0.1 V – 1000 V
AC current 1 A – 400 A 0.2 A – 300 A 10 mA – 400 A 0.1 A – 400 A 0.1 A – 200 A 0.1 A – 600 A 0.1 A – 600 A 0.1 A – 1000 A
DC current – 0.2 A – 300 A – – – 0.1 A – 600 A – –
resistance – – – 0.1 Ω – 20 MΩ 0.1 Ω – 20 MΩ – 0.1 Ω – 400 Ω 0.1 Ω – 400 Ω
continuity/diode –/– –/– –/– yes/– yes/yes –/– yes/– yes/–
frequency – – – – – – 1 Hz – 400 Hz 1 Hz – 400 Hz
effective power – – – – – – – –
power factor (cos φ) – – – – – – – –
temperature – – – – – – – –
volt sensor – – – – yes – – –
memory
– – HOLD, MAX HOLD HOLD HOLD
HOLD, MAX/MIN, HOLD, MAX/MIN,
PEAK PEAK
measuring method – – RMS RMS RMS RMS RMS RMS
max. clamp opening 30 mm 25 mm 30 mm 30 mm 16 mm 38 mm 37 mm 53 mm
measuring category CAT III 300 V CAT III 600 V CAT III 600 V CAT III 600 V CAT IV 600 V CAT III 300 V CAT III 600 V CAT IV 600 V
item no. 044037 044038 044061 044062 044063 044031 044056 044058
Digital Current Clamp Multimeter/Current Clamp Adapter
output: 1 mV AC per
1 A AC
suitable for BENNING ...
MM 1-1/1-2/1-3/2/3,
MM 5-1/5-2/7-1/9/10/11,
IT 130
output: 1 mV/10 mV AC/DC
per 1 A AC/DC
suitable for BENNING ...
PV 1-1, MM 1-1/1-2/1-3,
MM 2/3/5-1/5-2/7-1/9/10/11,
IT 130
CC 3 CC 1
CM 2
CM 3
B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t
BENNING CM 1-1, CM 1-2, CM 1-3, CM 4 and CM 6
Digital Current Clamp Multimeter for AC current
Innovative technology, practical design
• safe current measuring up to max. 1000 A AC
• measuring inputs for voltage, resistance, continuity and
diode test
• integrated volt sensor signalises phase voltages by means
of an acoustic signal and a red LED signal (CM 1-3)
• it localizes cable breaks and defective lamps in exposed
cables (cable reel, light chains) via the feeding side of the
phase (CM 1-3)
BENNING CM 2 and CM 3
Digital Current Clamp Multimeter for
AC/DC current
• safe and non-contact measuring of high currents
• DC and AC current measuring up to 600 A AC/DC
• measurement of low currents (automotive, photovoltaics,
industry) (CM 2)
• measuring inputs for voltage, resistance and continuity
test (CM 2)
• precise due to TRUE RMS measuring method (CM 2)
Digital Current Clamp Multimeter
for AC/DC current
Our
best seller!
TRUE RMS
volt sensor
CAT IV 600 V
CM 1-3
CM 1-2
CM 1-1
BENNING CC 1 and CC 3
AC and AC/DC current clamp adapters
• safe current measuring up to max. 400 A AC
• connection via 4 mm safety measuring leads
tested and
approved
IEC/EN 61010-1
(DIN VDE 0411-1)