Datasheet

17
B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t
DUTEST
®
pro
item no. 050156
TRITEST
®
pro
item no. 020052
TRITEST
®
pro
Phase sequence indicator with high-power LED torch
and magnetic suspension
• indication of „clockwise“ and „counter-clockwise“ phase se-
quence by means of green/red LED
• indication of phase voltages L1, L2 and L3 by means of red LED
• voltage range: 400 V to 500 V AC (50 Hz to 60 Hz)
• luminous high-power LED torch
• integrated magnetic holder and belt clip at the rear of the
housing
• including three attachable 4mm probe tips and alligator clip
DUTEST
®
pro
Continuity and line tester for testing
high-impedance and low-impedance resistances
• continuity and semiconductor test by means of LEDs and
loud buzzer
•
visual indication by means of three LED steps:
0 - 100 Ω/1 kΩ/10 kΩ
• acoustic indication via buzzer up to approx. 100 Ω
•
external-voltage indication: 6 V to 400 V AC/DC (LEDs/ buzzer)
• polarity test, single-pole external conductor test (phase)
and non-contact cable break detector (volt sensor)
•
buzzer volume and brightness of the torch are adjustable
• precise and powerful LED torch
•
integrated magnetic holder and belt clip at the rear of the housing
Professional continuity tester and
phase sequence indicator for three-phase mains
volt sensor
TRITEST
®
easy
Non-contact phase/phase sequence
tester
• phase sequence testing in three-phase
mains
• phase testing on sockets and distribution
boxes
• testing with regard to phase balance
• testing insulated lines (cable reel, chains of
lights) of cable breaks
• indication via red/green probe tip and
buzzer
• ON/OFF push-button with automatic
switch-off
• voltage range: 200 V – 1000 V AC
•
break-proof ABS housing and easy operation
• incl. Batteries and pen clip
Phase sequence testing
green = clockwise
Testing of cable breaks
TRITEST
®
easy
item no. 020051
CAT IV 600 V