Hard floor cleaner BMFC01 Manual Instruction Model No.
Contents: Safety Instruction Product introduction Installation Daily maintain & installation Common faults Specification Safety instruction About the manual Please follow the manual instruction to install the machines and keep this manual instruction. If you transfer the product to any third party to use, please attach this manual instruction. Any discrepant operation might lead to the damage of the product or possible personal hurt.
cause fire risk. If you don't use this machine for a long time, please turn off this machine and take off the plug. When you finish using the machine, make sure clean the dirty water tank in case of any risk of dirty block. There are electrical parts on the body and lower brush, please don't immerse whole machine into water. Please don't try to disassemble the machines and try to use this machine for other purpose, which might cause the damage of the machine.
The install of the machine: How to use this machine: Preparation when you start to use the machine, includes: Please make sure that the machines install well and check whether the battery power is enough. Please make sure that there is clean water in the clean water tank. Start to use: Switch on the machine after adding the clean water into the "clean water" tank, press the switch buttons for 1~2s to let the machine work, which shall wet the rollers.
Take off the rollers and dry them on the base. Start to use: Power indicator: Power indicator lighting, indicates: 100%, 65%,30% of the power. Three lights power range <100%, >65%. Two lights power range: >30%, <65%. One light power range: <30%. Three lights twinkle: nearly no power and need to charge immediately. Charge: Insert the adaptor to the machine, and connect with the power.
Daily maintains and installs:
Daily maintains and installs:
Common faults: Common faults: Product does not work: Possible reason Solution 1. No power or shorted powered Please charge the machine 2. Dirty water tank is fulfilled. Take out the water tank and clean it. 3. Roller is blocked by the air things Clean the roller 4. If none is as above 1. Water tank is installed in the wrong position Please contact us. Install the water tank again 2. Roller is blocked by hair things. Clean the roller Product is weak in cleaning or water leakage 3.
Product Spec: Product Data Rated voltage: DC 11.1V Rated currence: 3.2A Battery capacity: 2200mAh Clean water tank: 400ml Dirty water tank: 250ml Charging time: Working time after fully charging: 2-3h 30min Product size: 304*250*1220mm Net weight: 2.5kg Special Safety Instructions 1. Do not use the hard floor cleaner in the immediate proximity to sources of heat and do not mop hot objects such as cigarette butts or ashes. 2. Always connect the power plug into the socket with dry hands. 3.
Cleaning and Maintenance • Parts of the device must not be cleaned in the dishwasher except the roller. • To clean the casing, switch the device off and disconnect the adaptor from the socket. • If necessary, you can clean the casing, filter compartments of the hard floor cleaner, and the roller. •Do not use abrasive cleaning agents (scouring agents, diluting agents) because they can damage the synthetic surface of the device.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
