SDS

Report No.:DGSM20180408MSDS01 Page 4 of 7 Pages
batteries or product.
Storage:
1. Batteries should be separated from other materials and stored in a noncombustible, well ventilated,
sprinkler-protected structure with sufficient clearance between walls and battery stacks.
2. Keep the sample in the cool, dry and well-ventilated place(temperature:-20~30degree C
humidity:45~85%). Do not exposure to direct sunlight for long periods.Keep away from fire and heating
sources. Don’t keep the samples with oxidizer and acid.
3. charge the battery every 6 months to the amount specified by the manufacture, even if the battery is not
used.
4. Equip with relevant types and quantities of the extinguishment instruments. The storage place should be
equipped with suitable shelter materials for divulgence handling.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Control:
Keep away from heat and open flame. Supply with sufficient partial air exhaust. Store in a cool, dry place.
Respiratory Protection:
Not necessary under conditions of normal use. Wear self-contained breathing filtermask if the density
exceed in the air. Wear breathing apparatus under the condition of emergency rescue or evacuation.
Eyes Protection:
Not necessary under conditions of normal use. Wear protective glasses if handling a leaking or ruptured
battery.
Skin and Body Protection:
Not necessary under conditions of normal use. Wear fireproofing, gas defense clothes in case of handling
a leaking or ruptured battery.
Hands Protection:
Not necessary under conditions of normal use. Wear chemical resistant rubber .
Other Protections:
No smoking, dining and drinking water in the workplace. Keep good habit of hygiene.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Silvery
Physical state:
solid.
Form:
prismatic
Odor:
Odorless
Solubility:
Insoluble in water.
SECTION 10 – STABILITY AND REACTIVITY
Stability:
Stable under normal temperature and pressure.
Distribution of Ban:
Strong oxidizer, strong acid and corrosives