Material Safety Data Sheet Product Name: Polymer Li-ion Battery Pack Model: SUM 401724 Revision Date: Apr. 11, 2018 Report No.: DGSM20180408MSDS01 Compiler: Reviewer: Approver: Guangzhou CP-UP Certification Technology Service Co., Ltd.
Report No.:DGSM20180408MSDS01 Page 2 of 7 Pages Material Safety Data Sheet SECTION 1 - CHEMICAL AND COMPANY IDENTIFICATION Name of Sample: Model and Ratings: Polymer Li-ion Battery Pack SUM 401724 3.7V 110mAh 0.407Wh Company: Address: Dongguan SUM Electronics Technology Co., C4 ZHONGDING COMMUNICATION INDUSTRIAL Ltd. PARK, No. 172 HUAN CUN ROAD , ZHUTANG VILLAGE, FENGGANG Zip code: GUANGDONG, CHINA Fax: 523681 E-mail: / Emergency Telephone: sum@sumdz.
Report No.:DGSM20180408MSDS01 Page 3 of 7 Pages SECTION 4 – FIRST AID MEASURES Eye Exposure: In case of contact with eyes, flush with copious of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. Skin Exposure: If the internal battery materials of an opened battery cell some into contact with skin, immediately flush with plenty of water. Inhalation Exposure: If inhaled the internals of battery vomiting. Seeking Immediate medical attention.
Report No.:DGSM20180408MSDS01 batteries or product. Page 4 of 7 Pages Storage: 1. Batteries should be separated from other materials and stored in a noncombustible, well ventilated, sprinkler-protected structure with sufficient clearance between walls and battery stacks. 2. Keep the sample in the cool, dry and well-ventilated place(temperature:-20~30degree C humidity:45~85%). Do not exposure to direct sunlight for long periods.Keep away from fire and heating sources.
Report No.:DGSM20180408MSDS01 Conditions to Avoid: Page 5 of 7 Pages Fire source, heating source, disassemble, external short circuit, crushes, deformation, high temperature above 100℃, direct sunlight and high humidity, immerse in water or overcharge. Hazardous Polymerization: Will not occur.
Report No.:DGSM20180408MSDS01 Page 6 of 7 Pages SECTION 13 - DISPOSAL CONSIDERATIONS Appropriate Method of Substance: The battery should be completely discharged prior to disposal in order to prevent short circuit. The battery contains recyclable materials. It is suggested recycle.Refer to National or Local regulations before handling.
Report No.:DGSM20180408MSDS01 Page 7 of 7 Pages Other Information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. We make no warranty of merchantability or any other warranty express or implied, With respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes.