Owner's Manual
7
8.4 Sighting-in your scope:
Sighting-in of your AIRBOW should be done at 30 yards using the center crosshairs.
1. Remove the covers from your windage and elevation dials.
2. Stabilize your AIRBOW and shoot a group at your target.
3. Adjust the windage for left/right and elevation for up/down. One click of adjustment will change the
arrows’s point of impact ¼ MOA OR ¼” at 100 yards, ⁄” at 50 yards.
4. Take a follow up shot and continue to adjust until your reticle and groups are aligned.
HELPFUL TIP: Before sighting, turn the elevation adjustment knob all the way in the “up” direction, then turn
back in the "down" direction 1½ turns. This will get you close to the correct sight-in position
8.5 Reticle Map:
The reticle pattern corresponds to the following yardages (yardages are only approximate, bolt/arrow weight,
velocity, etc., can all aect aiming points and yardages).
9.0 Quiver Assembly:
Your AIRBOW comes equipped with a quiver, quiver mount and picatinny accessory mount.
See gures 10 and 11 for assembly instructions.
10.0 Firing Safely:
1.
Always point your AIRBOW in a SAFE DIRECTION.
2. Follow the instructions for pressurizing the AIRBOW
(Section 6.1) and loading an arrow (Section 4.1).
3. Cock the AIRBOW (See Section 5.1).
4. Once you have the proper sight picture on your target,
push the safety lever to the “re” position.
5. Pull the trigger (See Section 7.0).
30
35
39
43
50
47
54
61
67
73
24
30
35
39
43
50
47
54
61
67
73
24
Fig. 10
Fig. 11