UAV Altitude Holding Application

Case Study
Logistic UAV
TF02-Pro is installed at the height of
about 30cm below the multi-rotor
UAV. At a height within 6m, the UAV
mainly uses TF02-Pro ranging
information, and above 6m it mainly
uses GPS and other sensor
information.
LiDAR is installed directly under the UAV or under the wing, and measures vertically downward or
obliquely. It is more suitable for the complex environment (such as multiple echo interference) with
accurate measurement and no detection delay.
Patrol/Mapping UAV
Flight Formation
Driving School Coach Aircraft
TF02-Pro is installed under UAV at
the height of 20cm above the
ground. It control the UAV's
descending speed in real time to
ensure the stable landing during the
descending process.
TFmini-S is installed below the UAV
with 5cm above the ground. The
flight control can manage the
ascending, descending and hovering
of different UAVs to combine
beautiful patterns.
TF03 is installed under one wing of
UAV and the LiDAR is used as part of
the auxiliary landing system to
provide the aircraft with wings and
ground height information.
Installation
Email
[e-mail]
Website
en.benewake.com
Phone
[phone]
Address
10A Keshi Building Xinxi Rd, Haidian District, Beijing. Benwake (Beijing) Co., Ltd.
The real-time measuring ability of Benewake LiDAR is remarkable. Its’ FoV is small and the energy is concentrated,
There is no mechanical movement structure inside with 1cm accuracy and reliability. Its’ life is more than 3 years.
At present, Benewake LiDAR is widely used in UAV and aircraft for terrain following and altitude holding.