Smart Toilet Application

Scenic Spots
Shopping Centers
Airports
Installed LiDAR on top of the toilet
door (face down). When one person
walks in, the distance changed.
Then marked 1 person in.
LiDAR is installed above the squatting position and measures
vertically downward or obliquely. This application mode does not
need to have any restrictions on the installation height, children's
body shaking back and forth and other special circumstances will
not cause the accuracy changes or missing reports.
The real-time measurement ability of Benewake LiDAR sensor is remarkable. Its Fov is small, energy is concentrated,
accuracy is high and reliability is strong. Compared with the infrared sensor, it can obtain more accurate and stable
measurement with flexible installation. The service life is more than 3 years. At present, Benewake LiDAR sensor can be
widely used in airport, railway, park scenic spots, high-speed service areas, shopping malls and other places to realize the
detection of public toilet traffic flow and squatting space.
LiDAR is installed at the entrance of
airport toilet, which can detect the
entry of personnel in the real time
Two LiDARs are installed at the entrance and exit, which can not only
count the number and height of personnel, but also judge whether
the personnel are in or out. In case of personnel entering side by
side, you can install 3D LiDAR or multiple single point LiDAR in a row.
Squatting Detection
Toilet Traffic Detection
Case Study
Email
[e-mail]
Website
en.benewake.com
Phone
[phone]
Address
10A Keshi Building Xinxi Rd, Haidian District, Beijing. Benwake (Beijing) Co., Ltd.
Installation
Installed LiDAR in the shopping center
toilet on the top of stool powered by
batteries. It can detect squatting space
in the real time.