Manual

SJ-PM-TFmini Plus-T-01 A04 Benewake (Beijing) Co. Ltd.
Page6
1 Attentions
1.1 About this Manual
 This manual provides all the essential information during the usage of this product.
 Please carefully read this manual and make sure that you fully understand everything herein.
1.2 Usage of Product
 The maintenance of this product should be done by the professional technician, and the product
can only work with the factory spare part for ensuring the performance and safety.
 This product itself has no polarity and over-voltage protection. Please properly connect and supply
power as described in this manual.
 Operating temperature of this product is between -20℃ and 60℃. Do not use it beyond this
temperature range to prevent malfunction.
 Storage temperature of this product is between -20℃ and 75℃. Do not store it beyond this
temperature range to prevent malfunction.
 For ensuring the product performance, do not open the product shell or remove the IR-pass filter.
1.3 Conditions with Potential Malfunction
 Detecting object with high reflectivity, such as the mirror or the smooth floor tile, may cause a
system malfunction.
 The product will malfunction if there is any transparent object between it and the detecting object,
such as glass or water.
 The product will malfunction if its emitting or receiving IR-pass filter is covered by the dust.
Please keep the IR-pass filters clean.
 Please do not spread ethyl alcohol on the IR-pass filters, which are made of acrylic, IR-pass filters
will be damaged.
 Please do not pull the fine wire, the wire may be damaged.
2 Description
2.1 Product description
TFmini Plus is a milestone of Benewake in the process of promoting the cost-effective -LiDAR. Apart from
low-cost, small-size and low-power-consumption, TFmini Plus also improves the frame rate, introduces