LiDAR Auto-focus Application
Sci-Tech Park
Office building
LiDAR is installed on the side of the
infrared camera, and it is measured
towards the direction of people to
assist the camera auto-focus and
measure temperature.
LiDAR is installed on the side of one lens of the infrared thermal imager, and the ranging light source is facing the
pedestrian side. The LiDAR emits invisible light source. Please do not cross overlap with the camera or other 850nm
light source to avoid affecting the ranging effect. This application mode does not need accurate measurement of
human iris, and requires relatively low accuracy.
LiDAR is installed on the side of the
infrared camera, and it is measured
towards the direction of people.
Auto-focus will help camera realize
iris recognition.
Case Study
The real-time measuring ability of Benewake LiDAR Sensor is remarkable. Its’ FoV is small and the energy is
concentrated, There is no mechanical movement structure inside with high accuracy and reliability. Its’ service life is more
than 3 years. At present, Benewake LiDAR Sensor is widely used in airport, buildings, shopping mall to help camera
realize auto-focus or trigger photo taking functions.
Email
bw@benewake.com
Website
en.benewake.com
Phone
+86 10 5745 6983
Address
10A Keshi Building Xinxi Rd, Haidian District, Beijing. Benwake (Beijing) Co., Ltd.
Installation