Manual

SJ-PM-TFmini-S A00
Benewake (Beijing) Co. Ltd.
Page21
Cause: There are metal objects around the front lens barrel.
Troubleshooting: Remove or replace metal objects near the lens barrel with non-metallic materials. If the
metal material around the lens barrel in your installation position cannot be changed, and there are high
requirements for data stability and error at the extreme distance, please contact our technical support.
10 Q&A
Q1: Is TFmini-S available with 3.3V or other power supply voltage?
A1: Sorry, it is not available for the time being. The Standard power supply of TFmini-S is 5V±0.1V. If
you have any further requirement, please contact our sales person to consult a customization design matter.
Q2: TFmini-S will heat up after operating for a while. Is it broken?
A2: This is the normal operating condition of the product. The temperature of the chip and circuit board
will slightly up after a continuous operation, which is a normal case.
Q3: Can TFmini-S be connected with Arduino or Raspberry Pi for use?
A3: Yes, it can. TFmini-S adopts serial communication protocol so that it can connect to any control board
supporting serial port communication.
Contact
Headquarters:
0086-010-57456983
[e-mail]
Sales cooperation:
[e-mail]
[e-mail]
Technical support: