TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd.
TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd. Specified Product Product model: TF03 Product name: Single-Point Long-Distance LiDAR Manufacturer Company name: Benewake (Beijing) Co., Ltd. Address: No. 28, Xinxi Road, Haidian District, Beijing, PRC Copyright The Copyright of this document is protected. All the rights involved herein belong to Benewake (Beijing) Co., Ltd. Any copy activity of this document, no matter in whole or in part, should be in conformity of the Copyright Law.
TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd. Content 1 Product Overview ............................................................................................. 4 2 Key Features .................................................................................................... 4 3 Ranging Principle .............................................................................................. 4 4 Application Areas ..................................................................
TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd. 1 Product Overview TF03, as a single-point long distance LiDAR in accordance with the industrial level, mainly targets the intelligent transportation system, industrial UAV, automotive and other industrial applications. To maximize different requirements in different applications and scenarios, TF03 can be compatible with a variety of communication interfaces, featuring IP67 highintensity bodywork and the measurement frequency as high as 10KHz.
TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd.
TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd. Spot sizeⅡ 100m:100cm*28cm (horizontal * vertical) Laser safety level CLASS 1 (IEC 60825) 7 Communication and Interface Output data form Hexadecimal distance value; Character string; Switching value; Communication interface UART;CAN Baud rate UART:115200;CAN:1M 8 Mechanical/Electrical Parameters Power supply voltage DC 5V (≥200mA) Power consumption ≤0.
TF03 Product Specification V0.4 Restore factory settings Benewake(Beijing)Co., Ltd. TF03 tf03_setup software can be restored to its factory state through upper computers. After the configuration parameters have been modified, you can Configuration parameters send the corresponding instruction to select “Save storage during blackout Configurations Permanently”, so that the parameters will not lose due after power off.
TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd. End notes Ⅰ Detection Angle Descriptions TF03 has a 0.5-degree detection angle and rectangular light spots; see Table 1 for simulated diagrams of the light spots. Therefore, at different distances, the spot size, namely detecting range, is different as shown in Figure 2.
TF03 Product Specification V0.4 Spot 100m away Size: 100cm*28cm Spot 150m away Benewake(Beijing)Co., Ltd.
TF03 Product Specification V0.4 Benewake(Beijing)Co., Ltd. Ⅳ Protection Level Descriptions The IP protection grade is composed of two figures. The first figure represents the grade of electrical appliance dust proof and preventing the instrusion of foreign objects , and the second representing degree of electrical appliance moisture proof and water proof . TF03 has its protection level of IP67 - IP dust proof level 6, IP waterproof level 7.