Data Sheet

TF03 Product Manual V0.4
Benewake(Beijing)Co., Ltd.
Page23
『Dist Echo』： Unmeaning.
『FREEZE/CLEAR』：Click『FREEZE』to pause the PC for analysis of the images
in『Ⅳ』; click『CLEAR』to clear the drawing curve in『Ⅳ』and restart drawing.
『Date Amount』： 5 by default, namely, once receiving 5 points, the PC will average
the numerical values of the 5 frames and then output a frame. Modification is
allowable as needed (You’d better set the numerical value larger or equal to 5 for
preventing stagnation of the PC). After entering the value, press the keyboard
enter key to forward commands.
『Device Command』： Hexadecimal commands can be sent from this window to TF,
but it should be noted that you should first enter commands, then click the enter
key and then click『SEND COMMAND』below.
Ⅲ Data recording area『DATA RECORDING』
『RECORD』： Name the data to be saved in the text window, enter the file name,
press the enter key, use the『RECORD』button to record the TF data and the data
will be stored in the named text file; click the button『FINISHED』to stop data
recording.
『FOLDER』： Use『FOLDER』to open the folder with data saved.
Ⅳ Data image display area『TIME LINE CHART』
The PC will draw continuous ranging images according to the data received. The
vertical and horizontal coordinates represent the current distance and the number
of effective points respectively.
Ⅴ Real-time data display area『REAL-TIME DATA』
『Dist』： Unit: cm by default.
『Effective Point（per sec）』 : It represents the effective data refreshed by TF per
second.
『Strength』: In the pix mode, there is no strength input, so the “Strength” value is 0
by default.