Instruction Manual

70
Adjusting the back-sight
For the adjustment of the back-sight as illustrated
in figure 66, proceed as follows:
A - Lateral adjustment
By means of the relative screw, set the sight posi-
tion as desired (move it to the left if you want the
point of impact to move left or move it to the
right if you want the point of impact to move
right) by adjusting it according to the graduated
alignment notches.
B - Vertical adjustment
By means of the relative screw, set the sight posi-
tion as desired (in the “up” anticlockwise direc-
tion if you want to raise the point of impact or in
the opposite direction if you want the point of
impact to be lower) by adjusting it according to
the graduated alignment notches.
66