Instruction Manual

6) While holding the bolt assembly with one
hand (fig. 5) so as to counter-balance the
thrust of the recoil spring, push the carrier
button (fig. 16) and ease the bolt forward
until the recoil spring no longer pushes it for-
ward (fig. 33).
7) Pull the bolt assembly out of the receiver,
sliding it along its guides (fig. 34).
8) Remove the firing pin retaining pin from the
bolt assembly, while holding the firing pin
and firing pin spring in place (fig. 35).
9) Remove the firing pin and firing pin spring
from the bolt (fig. 36).
10) Remove the locking head rotating pin from
its seat (fig. 37).
11) Remove the bolt locking head from the bolt
(fig. 38).
61
33
34
35
36
38
37