Instruction Manual

Gun safety catch

Press the safety button on the trigger guard until

its red ring, indicating firing position, is no long-

er visible (figs. 17-18).

Before starting any operation on your shotgun,

make sure that the chamber and the magazine

are unloaded!

(Carefully read the instructions on gun loading

and unloading).

NOTE: make sure that your firearm is fitted with

a magazine tube containing a number of car-

tridges permitted by legislation in the country

where you intend to use it.

Loading procedure

NOTE: make sure that the shotgun safety catch

(see “Gun safety catch”) is engaged and the

hammer cocked (so that the carrier latch can

retain the cartridges as they are inserted in the

magazine).

WARNING: for safety reasons, check if by open-

ing the bolt the shotgun is unloaded. Then close

the bolt again.

1) The red dot on the cartridge drop lever (in-

dicating that the hammer is cocked) must be

clearly visible. To bring lever to this position,

press the carrier button and open the bolt by

hand, then bring it to close position again

(fig. 19).

2) With the bolt closed and the hammer

cocked, reverse the gun pointing the barrel

downwards.

3) Insert a cartridge into the magazine (fig. 20):

push it until it is retained by the carrier latch

which engages automatically (fig. 21).

Repeat the operation until the magazine is

fully loaded.

NOTE: the gun must be loaded with the hammer

cocked so that the carrier latch can retain the

cartridges as they are inserted in the magazine.