Manual

10
Funzionamento
Prima di effettuare qualunque tipo di intervento sull’arma, accerta-
tevi sempre che camera di scoppio e caricatore siano completamen-
te vuoti! (Leggere attentamente le istruzioni di caricamento e scarica-
mento dell'arma).
ARGO è una carabina a caricatore prismatico, disponibile in vari
calibri, a funzionamento semi-automatico basato sul sistema brevet-
tato Benelli ARGO (Auto Regulating Gas Operated) con testa di chiu-
sura rotante a tre denti di blocco che realizza una perfetta chiusura
assiale in culatta.
Il funzionamento dell’arma può essere suddiviso in 8 azioni specifi-
che:
sparo l’azione del grilletto libera il cane che urta il percussore,
provocando l’accensione della cartuccia incamerata. I
gas prodotti causano la fuoriuscita del proiettile dalla
canna e, contemporaneamente si espandono nel cilindro
presa gas, provocando l’immediato arretramento del
pistone. Quest’ultimo provoca l’arretramento dell’ottura-
tore con conseguente azione di:
sblocco ovvero apertura della camera di scoppio e avvio delle
successive azioni di
estrazione con presa e rimozione del bossolo dalla camera, e di:
espulsione che provoca la completa fuoriuscita del bossolo dall’ar-
ma. Nella fase finale dell’arretramento il meccanismo
provvede al
riarmo che si può sintetizzare come “accumulo di energia” per
lo sparo successivo. In contemporanea, altri dispositivi
provvedono alla fase di
Operation
Before beginning any operation whatsoever on your carbine,
always make sure that chamber and magazine have been comple-
tely emptied! (Carefully read loading and unloading instructions).
ARGO carbines are fitted with a prismatic magazine; their semi-auto-
matic operation is based upon the patented Benelli ARGO (Auto
Regulating Gas Operated) system, featuring a revolving bolt head
built with three locking teeth that perfectly close the breech axially.
We can divide the weapon’s operational system into 8 specific
actions:
firing once the trigger is pulled the hammer is set off and the
impact with the firing pin fires up the cartridge in the
chamber. The gasses that are given off by the reaction
shoot the shell out of the barrel and simultaneously
expand into the gas collector cylinder, thus causing
immediate retraction on behalf of the piston with subse-
quent bolt retraction. This consequently leads to the
clearing of the chamber, which is opened and made ready for
subsequent
extraction which entails removal of the cartridge case from the
chamber, and
ejection whereby the cartridge case is definitely ejected out of the
carbine. In the final phases of the out motion the mecha-
nism gets ready for
reloading which in synthesis can also be considered as being
“energy storage” for the next shot. Separate devices simul-
taneously provide