User Manual

1) Unscrew magazine cap by turning it “counter
clockwise” to the left (fig. 4).
In the case of the short magazine tube plus the
extension (two piece magazine), also remove the
extension.
CAUTION: when magazine extension is attach-
ed, carefully read the instructions entitled
“Magazine tube extension” before continuing.
2) Hold the shotgun vertically, grasping the barrel-
breech assembly and insert the barrel exten-
sion into the receiver. Be certain the barrel
guide ring fits correctly over the magazine tube
(fig. 5).
3) To make barrel insertion into the receiver
easier, push action release lever up in the
direction of the arrow to unlock the action
(fig. 6); push the barrel extension fully into the
receiver.
When properly installed, the ring on the out-
side of the barrel should rest firmly against the
front of the receiver.
4) Screw the magazine tube cap onto the ma-
gazine tube until it is hand-tight (fig. 7).
WARNING
When the pistol grip or telescopic stock is instal-
led on the shotgun the stock must be tightened
after the trigger guard assembly has been instal-
led in the receiver. Completely tighten the pistol
grip stock retaining nut or the telescopic stock
grip retaining ring nut until it solidly contacts
the shotgun receiver.
5) Ensure that the barrel is completely against
the receiver (fig. 8). The barrel should be
fixed and without movement when properly
assembled and tightened.
WARNING
Before performing any type of operation on the
firearm, visually and physically check the firing
chamber, carrier and magazine to verify that no
ammunition is present. The magazine follower
is orange in color with a raised circle in the cen-
ter to help distinguish it from the base of a shot
shell.
Make certain the firearm safety button is in the
“safe” position. Be sure that the chamber and
barrel are clear of all obstructions. Keep the
muzzle of the firearm pointed in a safe direc-
tion at all times.
Check that the ammunition is the correct gauge
and size for the firearm. Do not place finger or
any other object inside trigger guard. Failure to
follow these procedures could result in serious
injury or death to yourself or others.
5
5
7
6
8