User Manual

22
Ammunition to use
12 gauge
Correct functioning of the shotgun is only
guaranteed with cartridges of a maximum length
of 58 mm (2” 3/4 - 70 mm chamber), 66 mm (3”
- 76 mm chamber) or 78 mm (3” 1/2 - 89 mm
chamber).
20 gauge
Correct functioning of the shotgun is only
guaranteed with cartridges of a maximum length
of 58 mm (2” 3/4 - 70 mm chamber) or 66 mm
(3” - 76 mm chamber).
The shotgun accepts cartridges with rolled turnover
or crimped closures, and with lead or steel shot.
Magazine extension tube
12 gauge extension kit
The “+1 round” Magazine Extension includes: a
magazine cap extension with mounting holes, a
magazine extension tube, a plug for the mag-
azine extension and a long magazine spring.
12 gauge and 20 gauge extension kit
The “+2 rounds” and “+3 rounds” (12 gauge
only) Magazine Extensions include: a magazine
cap extension with mounting holes, a magazine
extension tube, a plug for the magazine exten-
sion, a long magazine spring, and a set of
clamps for attaching the extension to the barrel.
WARNING: To use magazine tube extensions
that protrude from the barrel's muzzle, it is
necessary to make sure to use cartridges with
such an energy to complete the combustion in-
side the barrel, to prevent firing heat and gas
from damaging the components.
Buttstock Cavity
WARNING:
The compartment is not for the storage of live
ammunition.
A compartment is located in the hollow butt-
stock of the shotgun where a recoil reducer can
be installed in the integrated assembly. The butt-
pad is not attached nor glued, and can be
removed without the use of any tool.
To reach the compartment:
1) Grasp the bottom of the buttpad and pull up-
wards (fig. 41-42).
2) To replace the buttpad, push it firmly against
the buttstock to replace it to its original posi-
tion (fig. 43).
ACCESSORIES AND ADJUSTMENTS
Optional Recoil Reduction Device
(12 gauge only)
WARNING:
Follow all safety instructions regarding place-
ment of the safety in the “on” position and
keeping the muzzle pointed in a safe direction.
To Install Optional Recoil Reduction Device:
1) Remove buttpad as earlier instructed.
2) Screw the Recoil Reduction Device inside the
buttstock cavity (fig. 65).
3) Depress metal tab of retainer in circle and pull
upward to remove it from the retainer slot (fig.
66A-66B).
4) Let spacer plug fall out of tube.
5) Insert choice of optional recoil reducer in tube.
6) Replace spacer plug and reinsert retainer tab.
7) Replace buttpad as earlier instructed.
65
66A 66B
NOVA model