User Manual

WARNING: once stock has been replaced, make

sure it is correctly retained to the receiver.

After having fired the first few rounds, repeat

check and if necessary, fix the stock again by

removing the butt pl,ate again and tightening the

nut again by using appropriate wrench.

Having altered the stock drop of the shotgun,

you have also obviously altered the firing posi-

tion as well: it is therefore necessary that you

first practice shooting some clay targets in order

to make sure that the firing position is suitable to

your size and shooting style.

NOTE: due to the softness of the material of

which the Benelli gel recoil pad is constructed,

the pad is more succeptable to rough use, includ-

ing excessive abrasion and exposure to sharp

edges. Such exposure can lead to superficial sur-

face damage. Superficial surface damage will not

result in a loss of the shock absorbing performan-

ce of the gel pad.

Telescoping stock

Adjusting

1) Press the lock button (fig. 44) and move the

stock back as far out as it will go (fig. 45).

2) Press the lock button using more force to

remove the stock completely (fig. 46).

Short tube limiter

Increasing Magazine Capacity

Your new shotgun is shipped from the factory

with a plastic rod in the magazine that limits

the magazine capacity to two cartridges to

comply with federal migratory game regula-

tions.