Parts List

English
28
VERTICAL rear sight assembly adjustment
(figure 9).
– Use toothed device (C) to change the eleva-
tion of the rear sight assembly.
– Lift lever
(D) and turn it towards the (+) sign
or towards the (–) sign to modify the impact
point of the projectile.
– Turning towards the (+) sign lifts the shot;
turning towards the (–) sign lowers the shot.
– Each click of the toothed device corresponds
to a shift (upwards or downwards) by 9 mm,
measured at a distance of 25 m.
Rear sight assembly WINDAGE adjustment
(figure 10).
– Use toothed device (E) to move the rear sight
assembly sideways.
– Lift lever
(F) and turn it clockwise or counter-
clockwise to adjust shifting (see arrows on
the firearm).
– Turning clockwise makes the shot go right-
wards; turning counterclockwise makes the
shot go leftwards.
– Each click of the toothed device corresponds
to a shift (rightwards or leftwards) by 4 mm,
measured at a distance of 25 m.
REAR SIGHT ADJUSTMENT (MODEL
MP 95E)
VERTICAL rear sight assembly adjustment
(figure 11).
– Use screw (A1) to change the elevation of
the rear sight assembly.
– Turning clockwise lifts the shot; turning
counterclockwise lowers the shot.
– Each click of the screw corresponds to a shift
(upwards or downwards) by 9 mm, meas-
ured at a distance of 25 m.
Rear sight assembly WINDAGE adjustment
(figure 12).
– Use screw (B1) to move the rear sight assem-
bly sideways.
– Turning the screw clockwise makes the shot
go rightwards; turning it counterclockwise
makes the shot go leftwards.
– Each click of the screw corresponds to a shift
(rightwards or leftwards) by 4 mm, meas-
ured at a distance of 25 m.
475-003-0.fm Page 28 Thursday, August 26, 2010 1:52 PM