Parts List

English
26
Setting of the WEIGHT OF THE SECOND POR-
TION of the pull
– Turn screw (B) to change the weight - figure 4.
– Loosen screw (L) - figure 5 - and turn screw (B)
- figure 4 - clockwise to increase the weight,
and counterclockwise to decrease it.
– Once the adjustment is completed, tighten
screw (L) - figure 5 - gradually for an ideal fric-
tion of the screw (B) - figure 4.
Changing the LENGTH OF THE FIRST PORTION
of the pull
– Turn eccentric cam pivot (F) to change the
length - figure 5.
– Loosen screw
(H) and turn pivot (F) clockwise
to increase the length, and counterclockwise
to decrease it (figure 5).
– Once the adjustment is completed, tighten
screw
(H) - figure 5.
In any case the index shown on the pivot
must always remain inside the sector, which
is limited by the two indexes on the guard.
Changing the LENGTH OF THE SECOND POR-
TION of the pull
– Turn screw (C) to change the length - figure 4.
– Loosen screw (E) - figure 5 - and turn screw (C)
- figure 4 - clockwise to increase the length,
and counterclockwise to decrease it.
Use the supplied tool to turn screw (C).
– Once the adjustment is completed, tighten
screw (E) - figure 5.
Changing the FREE TRAVEL (trigger stop) of the
trigger
–Turn screw (D) to change the length - figure 4.
– Turn screw clockwise to shorten the travel, and
counterclockwise to increase it.
If screw is turned clockwise too far, the pull
action will disappear.
– If required, turn screw (N) - figure 5 - to in-
crease or decrease the friction of the screw (D)
- figure 4.
Trigger ROTATION adjustment
– Turn screw (G) to rotate the trigger longitudi-
nally and rotationally - figure 5.
– Once the settings are completed, properly
reassemble the trigger guard assembly on
the weapon (See "Assembling the pistol").
475-003-0.fm Page 26 Thursday, August 26, 2010 1:52 PM