Parts List

English
25
– Avoid the use of alcoholic beverages or sub-
stances that might lower the attention levels
before and during any shooting.
Be extremely careful when handling your
pistol. Accidents are almost always the re-
sult of insufficient attention paid to funda-
mental safety regulations.
FIREARM INTEGRITY CHECK
Upon delivery of the firearm, check that it cor-
responds to the ordered weapon, that the
packaging is in good conditions and that the
main parts are not damaged or visibly dented.
In case of damage to the firearm (visible or
supposed) or if any part is missing, contact
your dealer to decide the best procedure.
RECOMMENDATIONS FOR THE SET-
TINGS
Carry out the settings described using only the
tools provided or compatible tools. All tools
must be in good working conditions.
TRIGGER ASSEMBLY ADJUSTMENT
(MODEL MP 90S)
To adjust the assembly, remove the trigger
guard assembly from the weapon (See
"Stripping the pistol").
Figure 4-5 shows the parts to be used to carry
out the settings.
Setting of the WEIGHT OF THE FIRST PORTION
of the pull (free travel)
– Turn screw (A) to change the weight - figure 4.
– Turn screw (A) clockwise to increase the
weight, and counterclockwise to decrease it
(figure 4).
– If required, turn screw (M) - figure 5 - to in-
crease or decrease the friction of the screw
(A) - figure 4.
475-003-0.fm Page 25 Thursday, August 26, 2010 1:52 PM