User Manual

Cleaning must be repeated until all traces and

lines of dirt have been completely removed. At

the end of each cleaning cycle, apply a homoge-

nous layer of CLP (Cleaning, Lubricant,

Protective) type oil to all metal parts.

IMPORTANT: the inside of the cylinder and gas

collector pistons do not require lubricating.

We recommend using the Benelli gun oil and

cleaning set (fig. 51) (supplied with the gun).

Shotgun assembly

For correct assembly of the gun proceed as fol-

lows:

1) Install gas pistons (fig. 52). Using the cocking

lever, screw gas plugs into cylinders (fig. 53).

2) Rotate the pistol grip onto the receiver

(clockwise direction from rear sight) (fig. 54)

until it is against the back end of the receiver;

then align it with the receiver (max are addi-

tional turn).

3) Install the telescoping stock (figs. 55-56), fol-

lowing in the reverse sequence of which it

was disassembled.