User Manual

Unloading
(This operation must be carried out with the gun
safety catch engaged - see “Gun safety catch”
and barrel pointed in a safe direction)
To unload the shotgun, proceed as follows:
1) Open the bolt: the cartridge in the chamber
will be extracted and ejected (fig. 23).
2) Close the bolt: gently releasing the cocking
lever (fig. 24).
3) Reverse the gun and - thrusting the carrier
towards inside - press the carrier latch fron-
tal part with your index finger (fig. 25); the
first cartridge will come out. The carrier
latch must be pressed for each released car-
tridge.
WARNING: gun can be unloaded by repeating
the operation, as described under point B of the
chapter: ”Cartridge replacement”.
Gun stripping
Before attempting any work on your M4 make
sure that the chamber and the magazine of your
shotgun are unloaded.
(See the instructions on loading and unloading).
M4 is a modular-style shotgun: no armorer tools
are required for its stripping.
Stripping procedure
1) Pull the cocking lever back (fig. 26).
11
26
25
23
24