User Manual

Gun safety catch

Press the safety button on the trigger guard until

its red ring, indicating firing position, is no longer

visible (figs. 12-13).

Telescoping stock adjustment

M4 is fitted with a two position telescoping

stock:

short/extended

Starting with the telescoping stock extended and

to shorten it (fig. 14):

a) Depress locking button.

b) Rotate the extendible stock clockwise (rear

view).

c) Push it forward till front stop.

d) Rotate the stock counter-clockwise and

release the button.

To extend the stock, follow the reverse sequence.

Before attempting any work on your M4 make

sure that the chamber and the magazine of your

shotgun are unloaded.

(See the instructions on loading and unloading).

NOTE: make sure that your firearm is fitted with

a magazine tube containing a number of car-

tridges permitted by legislation in the country

where you intend to use it.

According to laws and regulations in effect, the

capacity of the magazine should be reduced

with the appropriate reducer.

Loading procedure

NOTE: make sure that the shotgun safety catch

(see “Gun safety catch”) is engaged and the ham-

mer cocked (so that the carrier latch can retain

the cartridges as they are inserted in the magazine

- see “Assembly procedure”, point 3, page 6).

WARNING: for safety reasons, check if by open-

ing the bolt the shotgun is unloaded.

Then close the bolt again.

Telescoping stock