User manual

5
3. Loading and Unloading
WARNING! Before starting any operation on gun, make sure that the gun chamber and magazine are UNLOADED
and the safety is engaged!!
Since the Benelli M2 Use and Maintenance manual is included, you will refer to it for all safe gun handling information.
This section is only intended to explain loading and unloading of XRAIL System ammunition. For loading and unloading
basics, please refer to operations section in the Benelli manual on pages 12-17.
With the gun in a safe condition per Benelli Manual pages 1-5, loading the XRAIL System is done by following the
picture instructions 1-4 below.
Repeat the loading sequence 3 and 4 above to load the remaining auxiliary tubes without pulling the pin during rotation.
Pulling the pin is only done when rotating the main tube to Auxiliary tube 1.
When rotating tubes, there will be some resistance from the torsion spring and friction of the shells sliding up the ramp
shown in picture 1 above, this is normal.
When unloading the system, whether shooting or cycling the action as described in the Benelli M2 manual, the XRAIL
Systems tube housing will rotate automatically to the next string of shells until the system is empty. The first shell
loaded will be the last one unloaded from the system.