User manual

MPTP | MPTP commands 90
Check Command format from 4.6.8
The special fields of the command are as follows:
Setting ID
Field Description Range
2211 Displays Defines how the display is reacting on the
TWIG SOS button. If displays are disabled
also backlight is disabled. Default 1.
0= disabled
1= active
2212 Vibrator Defines if vibrator is used to indicate “keep
pressing” or “press twice”. Vibrator will
activate in same sequence ans the
wedges on the screen even if the displays
are off. Default= 1
0= disabled
1= active
2213 Application sound
level
Defines the sound level how the warning
and information tones are played within
TWIG SOS, Man Down and RF transmitter
initiated TWIG SOS Default= 3
1-5
2214 Speaker level Defines the Speaker volume level in TWIG
SOS. if set to 0, only audio to center is
active. Default 3
0,1-5
4.6.13. Settings 2301–2399 –TWIG SOS event data settings
Defines the General TWIG SOS emergency cycle event data . Settings can be sent in same message
with limitation of 5 settings or total length of message 160 chacaters depending which is met first.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Protector SW CG1P.01.001.0000