User manual

MPTP | MPTP commands 89
Check Command format from 4.6.8
The special fields of the command are as follows:
Setting ID
Field Description Range
2201 SOS Key
activation mode
Defines how the TWIG SOS button is
activated. If set to 0, button is not active
0= disabled
1=long press
2= two presses
2202 Activation method
timeout
Defines how long the SOS button needs to
be pressed or within what tiem it needs to
be pressed twice. default 5
1-5 seconds
2203 GPS ON time Defines GPS on time after TWIG SOS is
activated. Default 600
600-65534 sec
2204 Cancellation
period
Defines the period when the TWIG SOS
still can be cancelled if activated from
TWIG SOS button. Default 0
0-20 sec
2205 END key timeout Defines if the TWIG SOS can be ended
once started. 0= can not be ended, default
1
0,1-5 sec
2206 Post emergency
usage
Defines if Post emergency mode is used.
Default 1
0..1
4.6.12. Settings 2211–2214 –TWIG SOS profile settings
Defines the General TWIG SOS profile settings . Settings can be sent in same message with limitation of
5 settings or total length of message 160 chacaters depending which is met first.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Protector SW CG1P.01.001.0000